SRAH-02A090 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-02A120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-02A150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-02A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-02A1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-02A250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-03A150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-03A and VRAH-03A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 1.5V to 5.0V. They are packagedinA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpr
SRAH-03A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-03A and VRAH-03A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 1.5V to 5.0V. They are packagedinA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpr
SRAH-05A090 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A100 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A1AF - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05A250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
SRAH-05B120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-05B150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-05C120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05C and VRAH-05C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 1.2V to 2.5V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-07C090 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-07C120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-07C150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-07C180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-07C250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
SRAH-08B090 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-08B100 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-08B120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-08B150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-08B1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
SRAH-10J100 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-10Jxx0 is part of the low cost non-isolated dc/dc power converter Series. The modules use aSMD or SIP package for ease of layout and space savings. The output is closely regulated and the efficiency of1.5V output is typically 88% at full load. Typical features include remote on/off, input under voltage lockout,over current protection and short circuit protection.
SRBC-10A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRBC-10Axx0 modules areA Series of non-isolated dc/dc converters that deliver up to 10A of outputcurrent with full load efficiency of 93% at 3.3V output. The open-frame construction and small footprint enabledesigners to develop cost and space-efficient solutions. Standard features include remote On/Off, over currentprotection, short current protection, and wide input.
SRDB-07A120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-07A modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal12V source. These converters are available inA range of output voltages from 1.2V to 5.0V. They are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 7A maximum output is also provided. Standardfeatures include remote on/off, over current and short circuit protection, UVLO and output voltage adjust. These products ma
SRDB-07A150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-07A modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal12V source. These converters are available inA range of output voltages from 1.2V to 5.0V. They are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 7A maximum output is also provided. Standardfeatures include remote on/off, over current and short circuit protection, UVLO and output voltage adjust. These products ma
SRDB-07A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-07A modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal12V source. These converters are available inA range of output voltages from 1.2V to 5.0V. They are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 7A maximum output is also provided. Standardfeatures include remote on/off, over current and short circuit protection, UVLO and output voltage adjust. These products ma
SRDB-07A330 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-07A modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal12V source. These converters are available inA range of output voltages from 1.2V to 5.0V. They are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 7A maximum output is also provided. Standardfeatures include remote on/off, over current and short circuit protection, UVLO and output voltage adjust. These products ma
SRDB-10E100 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-10E120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-10E150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-10E180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-10E33H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-10E50H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-10E modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal4.5V to 13.2V source. These converters are available inA range of output voltages from 1.0V to 5.0V. The output is closelyregulated and the efficiency of the 3.3V output module is typically 88% at full load. The modules are packaged inA compact,low profile, surface mount DIP package for ease of layout and space savings. 10A maximum output is also provided. Standar
SRDB-20E10H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-20ExxH is part of the non-isolated dc/dc converter Power Module Series. The modules useA DIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency of 5V outputmodule is typically 94% at full load.
SRDB-20E12H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-20ExxH is part of the non-isolated dc/dc converter Power Module Series. The modules useA DIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency of 5V outputmodule is typically 94% at full load.
SRDB-20E15H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-20ExxH is part of the non-isolated dc/dc converter Power Module Series. The modules useA DIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency of 5V outputmodule is typically 94% at full load.
SRDB-20E18H - NON-ISOLATED DC/DC CONVERTERSThe Bel SRDB-20ExxH is part of the non-isolated dc/dc converter Power Module Series. The modules useA DIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency of 5V outputmodule is typically 94% at full load.
V7AH-01CX50 - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-01Cxx0 is part of the low cost non-isolated dc/dc converter Series. The modules useA SMD orSIP package or vertical package for ease of layout and space savings. The output is closely regulated and theefficiency of 12V output module is typically 86% at full load. Typical features include allows burst modeoperation at low load currents and trim function (option).
V7AH-01FX20 - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-01Fxx0 is part of the low cost non-isolated dc/dc converter Series. The modules useA surfacemount package or vertical package for ease of layout and space savings. The output is closely regulated andthe efficiency of 12V output module is typically 88% at full load. Typical features include burst mode operationat light load and trim function (option).
V7AH-01FX2N - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-01FxxN modules are non-isolated, step down DC/DC converters that operate fromA 3V-5.5Vsource. Output voltage are -5V,-12V. They are packaged inA compact, overmolded package rated at 1A, 0.5A.Optional lead forming providesA vertical mount product for minimal footprint orA surface mount option forA verylow profile. The output is closely regulated and the efficiency is typically 88% at 1A, -5V output at full load.
V7AH-01FX50 - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-01Fxx0 is part of the low cost non-isolated dc/dc converter Series. The modules useA surfacemount package or vertical package for ease of layout and space savings. The output is closely regulated andthe efficiency of 12V output module is typically 88% at full load. Typical features include burst mode operationat light load and trim function (option).
V7AH-03C180 - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-03C1A0 modules areA Series of non-isolated, step down DC/DC converters that operate from anominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. It ispackaged inA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mountproduct for minimal footprint orA surface mount option forA very low profile. The output is closely regulated andthe efficiency for 2.5V output is typically 93% at full
V7AH-03C250 - NON-ISOLATED DC/DC CONVERTERSThe Bel x7AH-03C1A0 modules areA Series of non-isolated, step down DC/DC converters that operate from anominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. It ispackaged inA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mountproduct for minimal footprint orA surface mount option forA very low profile. The output is closely regulated andthe efficiency for 2.5V output is typically 93% at full
V7AH-08E1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel X7AH-12F1A0 is part of the low cost non-isolated dc to dc converter Series. This converter is availableinA range of output voltages from 0.9V to 3.3V. It is packaged inA compact, overmolded package rated at 12A.The output is closely regulated and the efficiency of 3.3V output module is typically 93% at full load. Typicalfeatures include remote on/off, input under voltage lockout, over current protection and short circuit protection.
V7BA-06E2AL - NON-ISOLATED DC/DC CONVERTERSThe Bel V7BC-10F2Ax modules areA Series of non-isolated dc-dc converters that deliver up to 10A of outputcurrent with full load efficiency of 94% at 3.3V output. These modules provide precisely regulated voltageprogrammable via external resistor from 0.75V to 3.63V overA wide range of input voltage (2.4V-5.5V). Thesemodules haveA sequencing feature that enables designers to implement various types of output voltagesequencing when powering multiple voltages onA board. The ope
V7BC-10F2A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel V7BC-10F2Ax modules areA Series of non-isolated dc-dc converters that deliver up to 10A of outputcurrent with full load efficiency of 94% at 3.3V output. These modules provide precisely regulated voltageprogrammable via external resistor from 0.75V to 3.63V overA wide range of input voltage (2.4V-5.5V). Thesemodules haveA sequencing feature that enables designers to implement various types of output voltagesequencing when powering multiple voltages onA board. The ope
V7BC-10F2AL - NON-ISOLATED DC/DC CONVERTERSThe Bel V7BC-10F2Ax modules areA Series of non-isolated dc-dc converters that deliver up to 10A of outputcurrent with full load efficiency of 94% at 3.3V output. These modules provide precisely regulated voltageprogrammable via external resistor from 0.75V to 3.63V overA wide range of input voltage (2.4V-5.5V). Thesemodules haveA sequencing feature that enables designers to implement various types of output voltagesequencing when powering multiple voltages onA board. The ope
V7NB-40A180 - NON-ISOLATED DC/DC CONVERTERSThe V7NB-40A Series are non-isolated step down DC/DC converters providing up to 40A of output current anddesigned to be compatible to the Intel VRM 9.0 / 9.1 VID codes. Standard features include remote on/off, overcurrent protection, remote sense andA power good signal. This product also makes use of adaptive positioningto improve transient response performance. These products are specifically design to powerA wide variety ofhigh performance microprocessors but may be used alm
V7PB-15C09L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Cxxx is part of the low cost non-isolated dc/dc converter Series. The modules useA SIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency is typically93% at 2.5V output at full load. Typical features include remote on/off, under-voltage lockout, over-currentprotection and short circuit protection.
V7PB-15C12L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Cxxx is part of the low cost non-isolated dc/dc converter Series. The modules useA SIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency is typically93% at 2.5V output at full load. Typical features include remote on/off, under-voltage lockout, over-currentprotection and short circuit protection.
V7PB-15C15L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Cxxx is part of the low cost non-isolated dc/dc converter Series. The modules useA SIPpackage for ease of layout and space savings. The output is closely regulated and the efficiency is typically93% at 2.5V output at full load. Typical features include remote on/off, under-voltage lockout, over-currentprotection and short circuit protection.
V7PB-15E09L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
V7PB-15E12L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
V7PB-15E15L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
V7PB-15E18L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
V7PB-15E1AL - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
V7PB-15E25L - NON-ISOLATED DC/DC CONVERTERSThe Bel V7PB-15Exxx Series are part of the low cost non-isolated DC/DC power converter Series. Thesemodules useA SIP package for ease of layout and space savings. The output is closely regulated and theefficiency at 3.3V output is typically 92% at full load. Typical features include remote on/off, under-voltagelockout, wide input voltage range, wide output trim range, over-current protection and short circuit protection.
VRAH-02A500 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-02A and VRAH-02A modules areA Series of non-isolated, step down DC/DC power converters that operate froma nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packaged in acompact, overmolded package rated at 2A. Optional lead forming providesA vertical mount product for minimal footprint or asurface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-03A250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-03A and VRAH-03A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 1.5V to 5.0V. They are packagedinA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpr
VRAH-03A330 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-03A and VRAH-03A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 1.5V to 5.0V. They are packagedinA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpr
VRAH-03A500 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-03A and VRAH-03A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 1.5V to 5.0V. They are packagedinA compact, overmolded package rated at 3A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpr
VRAH-05A090 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A100 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A1AF - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A330 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05A500 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05A and VRAH-05A modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 12V source. These converters are available inA range of output voltages from 0.9V to 5.0V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprint ora surface mount option forA very low profile. Standard features include remote on/off, over current and short circuit p
VRAH-05B150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-05B180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-05B250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-05B330 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05B and VRAH-05B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 1.2V to 3.3V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-05C120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-05C and VRAH-05C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 1.2V to 2.5V. They are packagedinA compact, overmolded package rated at 5A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
VRAH-07C150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
VRAH-07C180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
VRAH-07C250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-07C and VRAH-07C modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packagedinA compact, overmolded package rated at 7A. Optional lead forming providesA vertical mount product for minimalfootprint orA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitp
VRAH-08B120 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-08B150 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-08B180 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-08B250 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-08B330 - NON-ISOLATED DC/DC CONVERTERSThe Bel SRAH-08B and VRAH-08B modules areA Series of non-isolated, step down DC/DC power converters that operatefromA nominal 5V source. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packagedinA compact, overmolded package rated at 8A. Optional lead forming providesA vertical mount product for minimal footprintorA surface mount option forA very low profile. Standard features include remote on/off, over current and short circuitpro
VRAH-12F100 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-12Fxx0 Series are part of the low cost non-isolated dc/dc converter Series. These converters areavailable inA range of output voltages from 1.0V to 3.3 V. It is packaged inA compact, overmolded packagerated at 12 A. The output is closely regulated and the efficiency of 3.3V output module is typically 93% at fullload. Typical features include remote on/off, input under voltage lockout, over current protection and short circuitprotection.
VRAH-12F120 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-12Fxx0 Series are part of the low cost non-isolated dc/dc converter Series. These converters areavailable inA range of output voltages from 1.0V to 3.3 V. It is packaged inA compact, overmolded packagerated at 12 A. The output is closely regulated and the efficiency of 3.3V output module is typically 93% at fullload. Typical features include remote on/off, input under voltage lockout, over current protection and short circuitprotection.
VRAH-12F150 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-12Fxx0 Series are part of the low cost non-isolated dc/dc converter Series. These converters areavailable inA range of output voltages from 1.0V to 3.3 V. It is packaged inA compact, overmolded packagerated at 12 A. The output is closely regulated and the efficiency of 3.3V output module is typically 93% at fullload. Typical features include remote on/off, input under voltage lockout, over current protection and short circuitprotection.
VRAH-12F180 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-12Fxx0 Series are part of the low cost non-isolated dc/dc converter Series. These converters areavailable inA range of output voltages from 1.0V to 3.3 V. It is packaged inA compact, overmolded packagerated at 12 A. The output is closely regulated and the efficiency of 3.3V output module is typically 93% at fullload. Typical features include remote on/off, input under voltage lockout, over current protection and short circuitprotection.
VRAH-12F250 - NON-ISOLATED DC/DC CONVERTERSThe Bel xRAH-12Fxx0 Series are part of the low cost non-isolated dc/dc converter Series. These converters areavailable inA range of output voltages from 1.0V to 3.3 V. It is packaged inA compact, overmolded packagerated at 12 A. The output is closely regulated and the efficiency of 3.3V output module is typically 93% at fullload. Typical features include remote on/off, input under voltage lockout, over current protection and short circuitprotection.
VRBA-06F1A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel VRBA-06F1Ax modules areA Series of non-isolated dc/dc converters that deliver up to 6A of outputcurrent with full load efficiency of 93% at 3.3V output. These modules provide precisely regulated voltageprogrammable via external resistor from 0.75V to 3.63V overA wide range of input voltage (2.4 V-5.5 V). Theopen-frame construction and small footprint enable designers to develop cost and space-efficient solutions.Standard features include remote On/Off, over current
VRBA-06F1AL - NON-ISOLATED DC/DC CONVERTERSThe Bel VRBA-06F1Ax modules areA Series of non-isolated dc/dc converters that deliver up to 6A of outputcurrent with full load efficiency of 93% at 3.3V output. These modules provide precisely regulated voltageprogrammable via external resistor from 0.75V to 3.63V overA wide range of input voltage (2.4 V-5.5 V). Theopen-frame construction and small footprint enable designers to develop cost and space-efficient solutions.Standard features include remote On/Off, over current
VRBC-16E2A0 - NON-ISOLATED DC/DC CONVERTERSThe Bel VRBC-16E2Ax is part of the non-isolated dc/dc converter Series. The modules useA SIP package.These converters are available inA range of output voltages from 0.75V to 3.63V overA wide range of inputvoltage (Vin = 4.5 V-14 V). The Bel VRBC-16E2Ax hasA sequencing feature that enables designers toimplement various types of output voltage sequencing when powering. The efficiency is typically 93.5% at 3.3 Voutput and 5V input at full load.
VRBC-16E2AL - NON-ISOLATED DC/DC CONVERTERSThe Bel VRBC-16E2Ax is part of the non-isolated dc/dc converter Series. The modules useA SIP package.These converters are available inA range of output voltages from 0.75V to 3.63V overA wide range of inputvoltage (Vin = 4.5 V-14 V). The Bel VRBC-16E2Ax hasA sequencing feature that enables designers toimplement various types of output voltage sequencing when powering. The efficiency is typically 93.5% at 3.3 Voutput and 5V input at full load.
VRPB-10A10S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A12S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A15S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A18S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A20S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A25S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A33S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10A50S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10A Series modules are non-isolated, step down DC/DC power converters that operate fromA nominal 12Vsource. These converters are available inA range of output voltages from 1.0V to 5.0V. They are packaged in an industrystandard single-in-line footprint and provideA maximum 10A output. Standard features include remote on/off, remote sense,over current and short cicuit protection, overtemperature shutdown and output voltage adjust. Remote on/off logic is anoptional
VRPB-10B15L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10B modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal 5Vsource. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packaged inA compact, SIPpackage rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjustand industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically
VRPB-10B18L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10B modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal 5Vsource. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packaged inA compact, SIPpackage rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjustand industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically
VRPB-10B25L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10B modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal 5Vsource. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packaged inA compact, SIPpackage rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjustand industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically
VRPB-10B33L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10B modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal 5Vsource. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packaged inA compact, SIPpackage rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjustand industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically
VRPB-10B33S - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10B modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal 5Vsource. These converters are available inA range of output voltages from 0.9V to 3.3V. They are packaged inA compact, SIPpackage rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjustand industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically
VRPB-10C12L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10C modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packaged inA compact,SIP package rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltageadjust and industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typicall
VRPB-10C15L - NON-ISOLATED DC/DC CONVERTERSThe Bel VRPB-10C modules areA Series of non-isolated, step down DC/DC power converters that operate fromA nominal3.3V source. These converters are available inA range of output voltages from 0.9V to 2.5V. They are packaged inA compact,SIP package rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltageadjust and industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typicall