DA4410-6 Analog Devices - Integrated Video Filter with Selectable Cutoff Frequencies for RGB, HD/SD Y, C, and CV.The ADA4410-6 isA comprehensive integrated filtering solution that is carefully designed to give designers the flexibility to easily filter and drive many types of video signals, including high definition video. In the RGB/component channels, the cutoff frequencies of the sixth-order filters can be selected by two logic pins to obtain four filter combinations that are tuned for RGB, high definition, and standard definiti
DAC0808LCN National Semiconductor - 8-Bit D/A Converters
DAC0808LCN National Semiconductor - 8-Bit D/A Converter
DAC0808NS National Semiconductor - 8-Bit D/A Converters
DAC081S101 National Semiconductor - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail OutputThe DAC081S101 isA full-featured, general purpose 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and D
DAC081S101CIMK National Semiconductor - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail OutputThe DAC081S101 isA full-featured, general purpose 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and D
DAC081S101CIMKX National Semiconductor - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail OutputThe DAC081S101 isA full-featured, general purpose 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and D
DAC081S101CIMM National Semiconductor - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail OutputThe DAC081S101 isA full-featured, general purpose 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and D
DAC081S101CIMMX National Semiconductor - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail OutputThe DAC081S101 isA full-featured, general purpose 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and D
DAC082S085 National Semiconductor - 8-bit Micro Power Dual Digital-to-analog Converter With Rail-to-rail Output
DAC082S085CIMM National Semiconductor - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
DAC082S085CIMMX National Semiconductor - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
DAC082S085CISD National Semiconductor - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
DAC082S085CISDX National Semiconductor - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
DAC082S085EVAL National Semiconductor - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
DAC0830 National Semiconductor - 8-bit P Compatible, Double-buffered D ToA Converters
DAC0832LJ National Semiconductor - 8-Bit P Compatible, Double-Buffered D toA Converters
DAC084S085 National Semiconductor - 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC084S085 National Semiconductor - The DAC084S085 isA full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.
DAC084S085CIMM National Semiconductor - 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC084S085CIMM National Semiconductor - The DAC084S085 isA full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.
DAC084S085CIMMX National Semiconductor - 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC084S085CIMMX National Semiconductor - The DAC084S085 isA full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.
DAC084S085EVAL National Semiconductor - 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC0854 National Semiconductor - 8-bit Voltage-output
DAC0854BI National Semiconductor - Quad 8-bit Voltage-output Serial D/A Converter With Readback (discontinued)
DAC0854BIN National Semiconductor - 8-Bit Voltage-Output
DAC0854BIWM National Semiconductor - 8-Bit Voltage-Output
DAC0854CI National Semiconductor - Quad 8-bit Voltage-output Serial D/A Converter With Readback (discontinued)
DAC0854CIJ National Semiconductor - 8-Bit Voltage-Output
DAC0854CIN National Semiconductor - 8-Bit Voltage-Output
DAC0854CIWM National Semiconductor - 8-Bit Voltage-Output
DAC0854CM National Semiconductor - Quad 8-bit Voltage-output Serial D/A Converter With Readback (discontinued)
DAC08HP Analog Devices - 8-Bit, High-Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08HQ Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08HQ Analog Devices - 8-Bit, High-Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08N Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08NBC Analog Devices - 8-Bit, High-Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08Q Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08Q Analog Devices - 8-Bit, High-Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08Q2/883C Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08RC/883 Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC08RC/883C Analog Devices - 8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)
DAC10 Analog Devices - 10-bit High Speed Multiplying D/a Converter Universal Digital Logic Interface
DAC1006 National Semiconductor - Up Compatible, Double-buffered D ToA Converters
DAC1006LCN National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC1006LCWM National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC1007 National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC1007LCN National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC1008 National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC1008LCN National Semiconductor - uP Compatible, Double-Buffered D toA Converters
DAC101S101 National Semiconductor - 10-bit Micro Power Digital-to-analog Converter With Rail-to-rail Output
DAC101S101CIMK National Semiconductor - 10-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
DAC101S101CIMKX National Semiconductor - 10-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
DAC101S101CIMM National Semiconductor - 10-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
DAC101S101CIMMX National Semiconductor - 10-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
DAC101S101EVAL National Semiconductor - 10-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
DAC1020 National Semiconductor - 10-bit, 12-bit Binary Multiplying D/a Converter
DAC1020LC National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1020LCN National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1020LCV National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1020LI National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1020LIV National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1021 National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1021C National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1021LC National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1021LCN National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1022 National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC1022C National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1022LC National Semiconductor - 10-bit Binary Multiplying D/A Converter (discontinued)
DAC1022LCN National Semiconductor - 10-Bit, 12-Bit Binary Multiplying D/A Converter
DAC102S085 National Semiconductor - The DAC102S085 isA full-featured, general purpose DUAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V. The DAC102S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2
DAC102S085CIMM National Semiconductor - The DAC102S085 isA full-featured, general purpose DUAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V. The DAC102S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2
DAC102S085CIMMX National Semiconductor - The DAC102S085 isA full-featured, general purpose DUAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V. The DAC102S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2
DAC104S085 National Semiconductor - The DAC104S085 isA full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate fromA single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged inA 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2
DAC1054 National Semiconductor - Quad 10-bit Voltage-output Serial D/A Converter With Readback (obsolete)
DAC1054CI National Semiconductor - Quad 10-bit Voltage-output Serial D/A Converter With Readback (obsolete)
DAC1054CM National Semiconductor - Quad 10-bit Voltage-output Serial D/A Converter With Readback (obsolete)
DAC7822IRTARG4 TI - The DAC7822 isA dual, CMOS, 12-bit, current output digital-to-analog converter (DAC). This device operates fromA 2.5V to 5.5V power supply, making it suitable for battery-powered and many other applications.The DAC7822 operates withA fast parallel interface. Data readback allows the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeroes and the DAC outputs are at zero scale.The DAC7822 offers excellent 4-quadrant multiplication
DAC7822IRTATG4 TI - The DAC7822 isA dual, CMOS, 12-bit, current output digital-to-analog converter (DAC). This device operates fromA 2.5V to 5.5V power supply, making it suitable for battery-powered and many other applications.The DAC7822 operates withA fast parallel interface. Data readback allows the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeroes and the DAC outputs are at zero scale.The DAC7822 offers excellent 4-quadrant multiplication
DAC8 AMSCO - Analog Standard Cell 8-bit Digital To Analog Converter
DAC8534 TI - Quad Channel, Low Power, 16-bit, Serial Input Digital-to-analog Converter
DAC8534IPW TI - Quad Channel, Low Power, 16-Bit, Serial Input DIGITAL-TO-ANALOG CONVERTER
DAC8534IPWR TI - Quad Channel, Low Power, 16-Bit, Serial Input DIGITAL-TO-ANALOG CONVERTER
DAC8541 TI - 16-bit Single Channel, Parallel Input Digital-to-analog Converter With Rail Voltage Output
DAC8541Y/250 TI - DAC8541, Low Power, 16-Bit D-to-a Converter W/1.8V Compatible Parallel IF, Rail-to-rail Voltage Output
DAC8541Y/2K TI - DAC8541, Low Power, 16-Bit D-to-a Converter W/1.8V Compatible Parallel IF, Rail-to-rail Voltage Output
DAC8544 TI - Quad, 16-bit, Rail-to-rail Voltage Output, Parallel Interface, Digital-to-analog Converter
DAC8544I TI - QUAD, 16-BIT, RAIL-TO-RAIL VOLTAGE OUTPUT, PARALLEL INTERFACE, DIGITAL-TO-ANALOG CONVERTER
DAC8544IPFB TI - QUAD, 16-BIT, RAIL-TO-RAIL VOLTAGE OUTPUT, PARALLEL INTERFACE, DIGITAL-TO-ANALOG CONVERTER
DAC8544IPFBR TI - QUAD, 16-BIT, RAIL-TO-RAIL VOLTAGE OUTPUT, PARALLEL INTERFACE, DIGITAL-TO-ANALOG CONVERTER
DAC8550 Burr-Brown - 16-bit, Ultra-low Glitch, Voltage Output Digital-to-analog Converter
DAC8550B Burr-Brown - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8550IBDGKR Burr-Brown - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8550IBDGKT Burr-Brown - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8550IDGKR Burr-Brown - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8550IDGKT Burr-Brown - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551 TI - 16-bit, Ultra-low Glitch, Voltage Output Digital-to-analog Converter
DAC8551IDGK TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551IDGKR TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551IDGKRG4 TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551IDGKT TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551IDRBR TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8551IDRBT TI - 16-BIT, ULTRA-LOW GLITCH, VOLTAGE OUTPUT DIGITAL-TO-ANALOG CONVERTER
DAC8552 MAXIM - The DAC8552 isA 16-bit, dual channel, voltage output digital-to-analog converter (DAC) offering low power operation andA flexible serial host interface. Each on-chip precision output amplifier allows rail-to-rail output swing to be achieved over the supply range of 2.7V to 5.5V. The device supportsA standard 3-wire serial interface capable of operating with input data clock frequencies up to 30MHz for VDD = 5V.The DAC8552 requires an external reference voltage to set the output range of each DAC channel.
DAC8800FP Analog Devices - Octal 8-Bit CMOS D/A Converter
DAC8800FR Analog Devices - Octal 8-Bit CMOS D/A Converter
DAC8800FS Analog Devices - Octal 8-Bit CMOS D/A Converter
DAC8801 Burr-Brown - 14-bit, Serial Input Multiplying Digital-to-analog Converter
DAC8801IDGK Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8801IDGKR Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8801IDGKT Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8801IDRB Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8801IDRBR Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8801IDRBT Burr-Brown - 14-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8802 TI - Dual, Serial Input 14-Bit Multiplying DAC The DAC8802 isA dual, 14-bit, current-output digital-to-analog converter (DAC) designed to operate fromA single +2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.A doubled-buffered, serial data interface offers high-speed, 3-wire, SPI and microcontrolle
DAC8802IPW TI - Dual, Serial Input 14-Bit Multiplying DAC The DAC8802 isA dual, 14-bit, current-output digital-to-analog converter (DAC) designed to operate fromA single +2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.A doubled-buffered, serial data interface offers high-speed, 3-wire, SPI and microcontrolle
DAC8802IPWR TI - Dual, Serial Input 14-Bit Multiplying DAC The DAC8802 isA dual, 14-bit, current-output digital-to-analog converter (DAC) designed to operate fromA single +2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.A doubled-buffered, serial data interface offers high-speed, 3-wire, SPI and microcontrolle
DAC8803 TI - Quad, Current Output, Serial Input 14-bit Multiplying Digital-to-analog Converter
DAC8803IDBR TI - Quad, Current Output, Serial Input 14-Bit Multiplying Digital-to-Analog Converter
DAC8803IDBT TI - Quad, Current Output, Serial Input 14-Bit Multiplying Digital-to-Analog Converter
DAC8806 TI - DescriptionThe DAC8806,A multiplying digital-to-analog converter (DAC), is designed to operate fromA single 2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, voltage-to-current (I/V) precision amplifier.A parallel interface offers high-speed communications. The DAC8806 is packaged inA space-saving SSOP-28 package and has
DAC8806IDB TI - DescriptionThe DAC8806,A multiplying digital-to-analog converter (DAC), is designed to operate fromA single 2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, voltage-to-current (I/V) precision amplifier.A parallel interface offers high-speed communications. The DAC8806 is packaged inA space-saving SSOP-28 package and has
DAC8806IDBR TI - DescriptionThe DAC8806,A multiplying digital-to-analog converter (DAC), is designed to operate fromA single 2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, voltage-to-current (I/V) precision amplifier.A parallel interface offers high-speed communications. The DAC8806 is packaged inA space-saving SSOP-28 package and has
DAC8806IDBRG4 TI - 14-bits Parallel Input Multiplying DACThe DAC8806,A multiplying digital-to-analog converter(DAC), is designed to operate fromA single 2.7V to 5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, current-to-voltage (I/V) precision amplifier.A parallel interface offers high-speed communications. The DAC8806 is packaged inA space-savin
DAC8811 TI - 16-bit, Serial Input Multiplying Digital-to-analog Converter
DAC8811B TI - 16-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8811C TI - 16-Bit, Serial Input Multiplying Digital-to-Analog Converter
DAC8812 TI - Dual, Serial Input 16-bit Multiplying Digital-to-analog Converter
DAC8812B TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812C TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812IBPW TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812IBPWR TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812IBPWT TI - 16-Bit, Dual Serial Input Multiplying Digital-to-Analog ConverterThe DAC8812 isA dual, 16-bit, current-output digital-to-analog converter (DAC) designed to operate fromA single +2.7V to +5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.A double-buffered, serial data interface offers high-speed, 3-wire,
DAC8812ICPW TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812ICPWR TI - Dual, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8812ICPWT TI - 16-Bit, Dual Serial Input Multiplying Digital-to-Analog ConverterThe DAC8812 isA dual, 16-bit, current-output digital-to-analog converter (DAC) designed to operate fromA single +2.7V to +5.5V supply.The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external I-to-V precision amplifier.A double-buffered, serial data interface offers high-speed, 3-wire,
DAC8814 TI - Quad, Serial Input 16-bit Multiplying Digital-to-analog Converter
DAC8814IBDB TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8814IBDBR TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8814IBDBT TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8814ICDB TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8814ICDBR TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DAC8814ICDBT TI - Quad, Serial Input 16-Bit Multiplying Digital-to-Analog Converter
DB1104B Stanley - PKG Type = Bath Tub (PLCC-2) ; Emitted Color = Blue ; Lens Type = Clear ; Peak Wavelength λ P (nm) = 467 ; Luminous Intensity iv (mcd) Min = 10.0 ; Luminous Intensity iv (mcd) TYP = 25.0 ; Luminous Intensity iv (mcd) Max = 10 ; Viewing Angle (2 θ 1/2) = 120
DB1113F Stanley - PKG Type = Right Angle ; Emitted Color = Blue ; Lens Type = Diffused ; Peak Wavelength λ P (nm) = 467 ; Luminous Intensity iv (mcd) Min = 8.5 ; Luminous Intensity iv (mcd) TYP = 14.0 ; Luminous Intensity iv (mcd) Max = 10 ; Viewing Angle (2 θ 1/2) = 130
DB501P-S Diotec - 50 AMP HIGH FREQUENCY SOFT RECOVERY BRIDGE RECTIFIERS
DB502P-S Diotec - 50 AMP HIGH FREQUENCY SOFT RECOVERY BRIDGE RECTIFIERS
DB504P-S Diotec - 50 AMP HIGH FREQUENCY SOFT RECOVERY BRIDGE RECTIFIERS
DB506P-S Diotec - 50 AMP HIGH FREQUENCY SOFT RECOVERY BRIDGE RECTIFIERS
DB5304X Stanley - PKG Type = 5 ; Emitted Color = Blue ; Lens Type = Clear ; Peak Wavelength λ P (nm) = 467 ; Luminous Intensity iv (mcd) Min = 150.0 ; Luminous Intensity iv (mcd) TYP = 300.0 ; Luminous Intensity iv (mcd) Max = 20 ; Viewing Angle (2 θ 1/2) = 25
DB5305S Stanley - PKG Type = 5 ; Emitted Color = Blue ; Lens Type = Clear ; Peak Wavelength λ P (nm) = 467 ; Luminous Intensity iv (mcd) Min = 120.0 ; Luminous Intensity iv (mcd) TYP = 240.0 ; Luminous Intensity iv (mcd) Max = 20 ; Viewing Angle (2 θ 1/2) = 30
DB5306X Stanley - PKG Type = 5 ; Emitted Color = Blue ; Lens Type = Clear ; Peak Wavelength λ P (nm) = 467 ; Luminous Intensity iv (mcd) Min = 500.0 ; Luminous Intensity iv (mcd) TYP = 1000.0 ; Luminous Intensity iv (mcd) Max = 20 ; Viewing Angle (2 θ 1/2) = 10
DB-54003-470 STMicroelectronics - The DB-54003-470 isA common sourceN-Channel Enhancement-Mode Lateral FieldEffect RF power amplifer designed for UHFPortable radio applications
DB-55008-500 STMicroelectronics - RF POWER amplifier using 1 x PD55008 N-Channel enhancement-mode lateral MOSFETs
DB-55035S-930 STMicroelectronics - RF POWER amplifier using 1 x PD55035S N-Channel enhancement-mode lateral MOSFETs
12345678 ... 14