ChipFind - документация

Электронный компонент: AT93C66-10TC-2.5

Скачать:  PDF   ZIP

Document Outline

1
Features
Low-voltage and Standard-voltage Operation
5.0 (V
CC
= 4.5V to 5.5V)
2.7 (V
CC
= 2.7V to 5.5V)
2.5 (V
CC
= 2.5V to 5.5V)
1.8 (V
CC
= 1.8V to 5.5V)
User-selectable Internal Organization
1K: 128 x 8 or 64 x 16
2K: 256 x 8 or 128 x 16
4K: 512 x 8 or 256 x 16
3-wire Serial Interface
2 MHz Clock Rate (5V)
Self-timed Write Cycle (10 ms max)
High Reliability
Endurance: 1 Million Write Cycles
Data Retention: 100 Years
Automotive Grade and Extended Temperature Devices Available
8-lead PDIP, 8-lead JEDEC and EIAJ SOIC, and 8-lead TSSOP Packages
Description
The AT93C46/56/66 provides 1024/2048/4096 bits of serial electrically erasable pro-
grammable read only memory (EEPROM) organized as 64/128/256 words of 16 bits
each, when the ORG pin is connected to VCC and 128/256/512 words of 8 bits each
when it is tied to ground. The device is optimized for use in many industrial and com-
mercial applications where low power and low voltage operations are essential. The
AT93C46/56/66 is available in space-saving 8-lead PDIP and 8-lead JEDEC and EIAJ
SOIC packages.
3-wire Serial
EEPROMs
1K (128 x 8 or 64 x 16)
2K (256 x 8 or 128 x 16)
4K (512 x 8 or 256 x 16)
AT93C46
AT93C56
AT93C66
Rev. 0172O08/01
Pin Configurations
Pin Name
Function
CS
Chip Select
SK
Serial Data Clock
DI
Serial Data Input
DO
Serial Data Output
GND
Ground
VCC
Power Supply
ORG
Internal Organization
DC
Don't Connect
8-lead PDIP
1
2
3
4
8
7
6
5
CS
SK
DI
DO
VCC
DC
ORG
GND
8-lead SOIC
Rotated (R)
(1K JEDEC Only)
1
2
3
4
8
7
6
5
DC
VCC
CS
SK
ORG
GND
DO
DI
8-lead SOIC
1
2
3
4
8
7
6
5
CS
SK
DI
DO
VCC
DC
ORG
GND
(continued)
8-lead TSSOP
1
2
3
4
8
7
6
5
CS
SK
DI
DO
VCC
DC
ORG
GND
2
AT93C46/56/66
0172O08/01
The AT93C46/56/66 is enabled through the Chip Select pin (CS), and accessed via a
3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock
(SK). Upon receiving a READ instruction at DI, the address is decoded and the data is
clocked out serially on the data output pin DO. The WRITE cycle is completely self-
timed and no separate ERASE cycle is required before WRITE. The WRITE cycle is
only enabled when the part is in the ERASE/WRITE ENABLE state. When CS is brought
"high" following the initiation of a WRITE cycle, the DO pin outputs the READY/BUSY
status of the part.
The AT93C46 is available in 4.5V to 5.5V, 2.7V to 5.5V, 2.5V to 5.5V, and 1.8V to 5.5V
versions. The AT93C56/66 is available in 4.5V to 5.5V, 2.7V to 5.5V, and 2.5V to 5.5V
versions.
Block Diagram
Absolute Maximum Ratings*
Operating Temperature.................................. -55
C to +125C
*NOTICE:
Stresses beyond those listed under "Absolute
Maximum Ratings" may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability
Storage Temperature ..................................... -65
C to +150C
Voltage on Any Pin
with Respect to Ground .....................................-1.0V to +7.0V
Maximum Operating Voltage .......................................... 6.25V
DC Output Current........................................................ 5.0 mA
Notes:
1. When the ORG pin is connected to VCC, the x 16 organization is selected. When it is connected to ground, the x 8 orga-
nization is selected. If the ORG pin is left unconnected and the application does not load the input beyond the capability of
the internal 1 Meg ohm pullup, then the x 16 organization is selected. The feature is not available on the 1.8V devices.
2. For the AT93C46, if x 16 organization is the mode of choice and Pin 6 (ORG) is left unconnected, Atmel recommends
using the AT93C46A device. For more details, see the AT93C46A datasheet.
3
AT93C46/56/66
0172O08/01
Note:
1. This parameter is characterized and is not 100% tested.
Note:
1. V
IL
min and V
IH
max are reference only and are not tested.
Pin Capacitance
(1)
Applicable over recommended operating range from T
A
= 25
C, f = 1.0 MHz, V
CC
= +5.0V (unless otherwise noted).
Symbol
Test Conditions
Max
Units
Conditions
C
OUT
Output Capacitance (DO)
5
pF
V
OUT
= 0V
C
IN
Input Capacitance (CS, SK, DI)
5
pF
V
IN
= 0V
DC Characteristics
Applicable over recommended operating range from: T
AI
= -40
C to +85C, V
CC
= +1.8V to +5.5V,
T
AC
= 0
C to +70C, V
CC
= +1.8V to +5.5V (unless otherwise noted).
Symbol
Parameter
Test Condition
Min
Typ
Max
Unit
V
CC1
Supply Voltage
1.8
5.5
V
V
CC2
Supply Voltage
2.5
5.5
V
V
CC3
Supply Voltage
2.7
5.5
V
V
CC4
Supply Voltage
4.5
5.5
V
I
CC
Supply Current
V
CC
= 5.0V
READ at 1.0 MHz
0.5
2.0
mA
WRITE at 1.0 MHz
0.5
2.0
mA
I
SB1
Standby Current
V
CC
= 1.8V
CS = 0V
0
0.1
A
I
SB2
Standby Current
V
CC
= 2.5V
CS = 0V
6.0
10.0
A
I
SB3
Standby Current
V
CC
= 2.7V
CS = 0V
6.0
10.0
A
I
SB4
Standby Current
V
CC
= 5.0V
CS = 0V
17
30
A
I
IL
Input Leakage
V
IN
= 0V to V
CC
0.1
1.0
A
I
OL
Output Leakage
V
IN
= 0V to V
CC
0.1
1.0
A
V
IL1
(1)
V
IH1
(1)
Input Low Voltage
Input High Voltage
4.5V
V
CC
5.5V
-0.6
2.0
0.8
V
CC
+ 1
V
V
IL2
(1)
V
IH2
(1)
Input Low Voltage
Input High Voltage
1.8V
V
CC
2.7V
-0.6
V
CC
x 0.7
V
CC
x 0.3
V
CC
+ 1
V
V
OL1
V
OH1
Output Low Voltage
Output High Voltage
4.5V
V
CC
5.5V
I
OL
= 2.1 mA
0.4
V
I
OH
= -0.4 mA
2.4
V
V
OL2
V
OH2
Output Low Voltage
Output High Voltage
1.8V
V
CC
2.7V
I
OL
= 0.15 mA
0.2
V
I
OH
= -100 A
V
CC
- 0.2
V
4
AT93C46/56/66
0172O08/01
Note:
1. This parameter is characterized and is not 100% tested.
AC Characteristics
Applicable over recommended operating range from T
A
= -40C to + 85C, V
CC
= As Specified,
CL = 1 TTL Gate and 100 pF (unless otherwise noted).
Symbol
Parameter
Test Condition
Min
Typ
Max
Units
f
SK
SK Clock
Frequency
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
0
0
0
0
2
1
0.5
0.25
MHz
t
SKH
SK High Time
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
SKL
SK Low Time
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
CS
Minimum CS
Low Time
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
CSS
CS Setup Time
Relative to SK
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
50
50
100
200
ns
t
DIS
DI Setup Time
Relative to SK
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
100
100
200
400
ns
t
CSH
CS Hold Time
Relative to SK
0
ns
t
DIH
DI Hold Time
Relative to SK
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
100
100
200
400
ns
t
PD1
Output Delay to `1'
AC Test
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
PD0
Output Delay to `0'
AC Test
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
SV
CS to Status Valid
AC Test
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
250
250
500
1000
ns
t
DF
CS to DO in High
Impedance
AC Test
CS = V
IL
4.5V
V
CC
5.5V
2.7V
V
CC
5.5V
2.5V
V
CC
5.5V
1.8V
V
CC
5.5V
100
100
200
400
ns
t
WP
Write Cycle Time
10
ms
4.5V
V
CC
5.5V
3
ms
Endurance
(1)
5.0V, 25C, Page Mode
1M
Write Cycles
5
AT93C46/56/66
0172O08/01
Instruction Set for the AT93C46
Instruction
SB
Op
Code
Address
Data
Comments
x 8
x 16
x 8
x 16
READ
1
10
A
6
- A
0
A
5
- A
0
Reads data stored in memory, at
specified address.
EWEN
1
00
11XXXXX
11XXXX
Write enable must precede all
programming modes.
ERASE
1
11
A
6
- A
0
A
5
- A
0
Erase memory location A
n
- A
0
.
WRITE
1
01
A
6
- A
0
A
5
- A
0
D
7
- D
0
D
15
- D
0
Writes memory location A
n
-
A
0
.
ERAL
1
00
10XXXXX
10XXXX
Erases all memory locations. Valid
only at V
CC
= 4.5V to 5.5V.
WRAL
1
00
01XXXXX
01XXXX
D
7
- D
0
D
15
- D
0
Writes all memory locations. Valid
only at V
CC
= 4.5V to 5.5V.
EWDS
1
00
00XXXXX
00XXXX
Disables all programming
instructions.
6
AT93C46/56/66
0172O08/01
Functional
Description
The AT93C46/56/66 is accessed via a simple and versatile 3-wire serial communication
interface. Device operation is controlled by seven instructions issued by the host pro-
cessor. A valid instruction starts with a rising edge of CS and consists of a Start Bit
(logic "1") followed by the appropriate Op Code and the desired memory Address
location.
READ (READ): The Read (READ) instruction contains the Address code for the mem-
ory location to be read. After the instruction and address are decoded, data from the
selected memory location is available at the serial output pin DO. Output data changes
are synchronized with the rising edges of serial clock SK. It should be noted that a
dummy bit (logic "0") precedes the 8- or 16-bit data output string.
ERASE/WRITE (EWEN): To assure data integrity, the part automatically goes into the
Erase/Write Disable (EWDS) state when power is first applied. An Erase/Write Enable
(EWEN) instruction must be executed first before any programming instructions can be
carried out. Please note that once in the Erase/Write Enable state, programming
remains enabled until an Erase/Write Disable (EWDS) instruction is executed or V
CC
power is removed from the part.
ERASE (ERASE): The Erase (ERASE) instruction programs all bits in the specified
memory location to the logical "1" state. The self-timed erase cycle starts once the
ERASE instruction and address are decoded. The DO pin outputs the READY/BUSY
status of the part if CS is brought high after being kept low for a minimum of 250 ns (t
CS
).
A logic "1" at pin DO indicates that the selected memory location has been erased, and
the part is ready for another instruction.
WRITE (WRITE): The Write (WRITE) instruction contains the 8 or 16 bits of data to be
written into the specified memory location. The self-timed programming cycle, t
WP
, starts
after the last bit of data is received at serial data input pin DI. The DO pin outputs the
READY/BUSY status of the part if CS is brought high after being kept low for a minimum
of 250 ns (t
CS
). A logic "0" at DO indicates that programming is still in progress. A logic
"1" indicates that the memory location at the specified address has been written with the
data pattern contained in the instruction and the part is ready for further instructions. A
READY/BUSY status cannot be obtained if the CS is brought high after the end of
the self-timed programming cycle, t
WP
.
ERASE ALL (ERAL): The Erase All (ERAL) instruction programs every bit in the mem-
ory array to the logic "1" state and is primarily used for testing purposes. The DO pin
outputs the READY/BUSY status of the part if CS is brought high after being kept low for
a minimum of 250 ns (t
CS
). The ERAL instruction is valid only at V
CC
= 5.0V
10%.
WRITE ALL (WRAL): The Write All (WRAL) instruction programs all memory locations
with the data patterns specified in the instruction. The DO pin outputs the READY/BUSY
status of the part if CS is brought high after being kept low for a minimum of 250 ns (t
CS
).
The WRAL instruction is valid only at V
CC
= 5.0V
10%.
ERASE/WRITE DISABLE (EWDS): To protect against accidental data disturb, the
Erase/Write Disable (EWDS) instruction disables all programming modes and should be
executed after all programming operations. The operation of the READ instruction is
independent of both the EWEN and EWDS instructions and can be executed at any
time.
7
AT93C46/56/66
0172O08/01
Timing Diagrams
Synchronous Data Timing
Note:
1. This is the minimum SK period.
Notes:
1. A
8
is a DON'T CARE value, but the extra clock is required.
2. A
7
is a DON'T CARE value, but the extra clock is required.
READ Timing
Organization Key for Timing Diagrams
I/O
AT93C46 (1K)
AT93C56 (2K)
AT93C66 (4K)
x 8
x 16
x 8
x 16
x 8
x 16
A
N
A
6
A
5
A
8
(1)
A
7
(2)
A
8
A
7
D
N
D
7
D
15
D
7
D
15
D
7
D
15
8
AT93C46/56/66
0172O08/01
EWEN Timing
EWDS Timing
WRITE Timing
WRAL Timing
(1)
Note:
1. Valid only at V
CC
= 4.5V to 5.5V.
CS
t
CS
1
1
...
0
0
1
SK
DI
CS
t
CS
SK
DI
1
0
0
0
0
...
SK
CS
t
CS
t
WP
1
1
A
N
D
N
0
A0
D0
...
...
DI
DO
HIGH IMPEDANCE
BUSY
READY
CS
SK
DI
DO
HIGH IMPEDANCE
BUSY
READY
1
0
0
1
...
D
N
t
CS
t
WP
...
D0
0
9
AT93C46/56/66
0172O08/01
ERASE Timing
ERAL Timing
(1)
Note:
1. Valid only at V
CC
= 4.5V to 5.5V.
SK
1
1
...
1
CS
DI
A
N
t
CS
t
SV
t
DF
t
WP
A
N-1
A
N-2
A0
CHECK
STATUS
STANDBY
READY
BUSY
DO
HIGH IMPEDANCE
HIGH IMPEDANCE
SK
CS
DI
1
1
0
0
0
DO
HIGH IMPEDANCE
HIGH IMPEDANCE
READY
BUSY
CHECK
STATUS
STANDBY
t
WP
t
CS
t
SV
t
DF
10
AT93C46/56/66
0172O08/01
AT93C46 Ordering Information
t
WP
(max)
(ms)
I
CC
(max)
(A)
I
SB
(max)
(A)
f
MAX
(kHz)
Ordering Code
Package
Operation Range
10
2000
30.0
2000
AT93C46-10PC
AT93C46-10SC
AT93C46R-10SC
AT93C46W-10SC
AT93C46-10TC
8P3
8S1
8S1
8S2
8T
Commercial
(0
C to 70C)
30.0
2000
AT93C46-10PI
AT93C46-10SI
AT93C46R-10SI
AT93C46W-10SI
AT93C46-10TI
8P3
8S1
8S1
8S2
8T
Industrial
(-40
C to 85C)
10
800
10.0
1000
AT93C46-10PC-2.7
AT93C46-10SC-2.7
AT93C46R-10SC-2.7
AT93C46W-10SC-2.7
AT93C46-10TC-2.7
8P3
8S1
8S1
8S2
8T
Commercial
(0
C to 70C)
10.0
1000
AT93C46-10PI-2.7
AT93C46-10SI-2.7
AT93C46R-10SI-2.7
AT93C46W-10SI-2.7
AT93C46-10TI-2.7
8P3
8S1
8S1
8S2
8T
Industrial
(-40
C to 85C)
Package Type
8P3
8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-lead, 0.200" Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8T
8-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
11
AT93C46/56/66
0172O08/01
10
600
10.0
500
AT93C46-10PC-2.5
AT93C46-10SC-2.5
AT93C46R-10SC-2.5
AT93C46W-10SC-2.5
AT93C46-10TC-2.5
8P3
8S1
8S1
8S2
8T
Commercial
(0
C to 70C)
10.0
500
AT93C46-10PI-2.5
AT93C46-10SI-2.5
AT93C46R-10SI-2.5
AT93C46W-10SI-2.5
AT93C46-10TI-2.5
8P3
8S1
8S1
8S2
8T
Industrial
(-40
C to 85C)
10
80
0.1
250
AT93C46-10PC-1.8
AT93C46-10SC-1.8
AT93C46R-10SC-1.8
AT93C46W-10SC-1.8
AT93C46-10TC-1.8
8P3
8S1
8S1
8S2
8T
Commercial
(0
C to 70C)
0.1
250
AT93C46-10PI-1.8
AT93C46-10SI-1.8
AT93C46R-10SI-1.8
AT93C46W-10SI-1.8
AT93C46-10TI-1.8
8P3
8S1
8S1
8S2
8T
Industrial
(-40
C to 85C)
AT93C46 Ordering Information (Continued)
t
WP
(max)
(ms)
I
CC
(max)
(A)
I
SB
(max)
(A)
f
MAX
(kHz)
Ordering Code
Package
Operation Range
Package Type
8P3
8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-lead, 0.200" Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8T
8-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
-1.8
Low Voltage (1.8V to 5.5V)
R
Rotated Pinout
12
AT93C46/56/66
0172O08/01
AT93C56 Ordering Information
t
WP
(max)
(ms)
I
CC
(max)
(A)
I
SB
(max)
(A)
f
MAX
(kHz)
Ordering Code
Package
Operation Range
10
2000
30.0
2000
AT93C56-10PC
AT93C56-10SC
AT93C56W-10SC
8P3
8S1
8S2
Commercial
(0
C to 70C)
30.0
2000
AT93C56-10PI
AT93C56-10SI
AT93C56W-10SI
8P3
8S1
8S2
Industrial
(-40
C to 85C)
10
800
10.0
1000
AT93C56-10PC-2.7
AT93C56-10SC-2.7
AT93C56W-10SC-2.7
8P3
8S1
8S2
Commercial
(0
C to 70C)
10.0
1000
AT93C56-10PI-2.7
AT93C56-10SI-2.7
AT93C56W-10SI-2.7
8P3
8S1
8S2
Industrial
(-40
C to 85C)
10
600
10.0
500
AT93C56-10PC-2.5
AT93C56-10SC-2.5
AT93C56W-10SC-2.5
8P3
8S1
8S2
Commercial
(0
C to 70C)
10.0
500
AT93C56-10PI-2.5
AT93C56-10SI-2.5
AT93C56W-10SI-2.5
8P3
8S1
8S2
Industrial
(-40
C to 85C)
Package Type
8P3
8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-lead, 0.200" Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
13
AT93C46/56/66
0172O08/01
AT93C66 Ordering Information
t
WP
(max)
(ms)
I
CC
(max)
(A)
I
SB
(max)
(A)
f
MAX
(kHz)
Ordering Code
Package
Operation Range
10
2000
30.0
2000
AT93C66-10PC
AT93C66-10SC
AT93C66W-10SC
AT93C66-10TC
8P3
8S1
8S2
8T
Commercial
(0
C to 70C)
30.0
2000
AT93C66-10PI
AT93C66-10SI
AT93C66W-10SI
AT93C66-10TI
8P3
8S1
8S2
8T
Industrial
(-40
C to 85C)
10
800
10.0
1000
AT93C66-10PC-2.7
AT93C66-10SC-2.7
AT93C66W-10SC-2.7
AT93C66-10TC-2.7
8P3
8S1
8S2
8T
Commercial
(0
C to 70C)
10.0
1000
AT93C66-10PI-2.7
AT93C66-10SI-2.7
AT93C66W-10SI-2.7
AT93C66-10TI-2.7
8P3
8S1
8S2
8T
Industrial
(-40
C to 85C)
10
600
10.0
500
AT93C66-10PC-2.5
AT93C66-10SC-2.5
AT93C66W-10SC-2.5
AT93C66-10TC-2.5
8P3
8S1
8S2
8T
Commercial
(0
C to 70C)
10.0
500
AT93C66-10PI-2.5
AT93C66-10SI-2.5
AT93C66W-10SI-2.5
AT93C66-10TI-2.5
8P3
8S1
8S2
8T
Industrial
(-40
C to 85C)
10
80
0.1
250
AT93C66-10PC-1.8
AT93C66-10SC-1.8
AT93C66W-10SC-1.8
AT93C66-10TC-1.8
8P3
8S1
8S2
8T
Commercial
(0
C to 70C)
0.1
250
AT93C66-10PI-1.8
AT93C66-10SI-1.8
AT93C66W-10SI-1.8
AT93C66-10TI-1.8
8P3
8S1
8S2
8T
Industrial
(-40
C to 85C)
Package Type
8P3
8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-lead, 0.200" Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8T
8-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
-1.8
Low Voltage (1.8V to 5.5V)
Packaging Information
14
AT93C46/56/66
0172O08/01
.400 (10.16)
.355 (9.02)
PIN
1
.280 (7.11)
.240 (6.10)
.037 (.940)
.027 (.690)
.300 (7.62) REF
.210 (5.33) MAX
SEATING
PLANE
.100 (2.54) BSC
.015 (.380) MIN
.022 (.559)
.014 (.356)
.150 (3.81)
.115 (2.92)
.070 (1.78)
.045 (1.14)
.325 (8.26)
.300 (7.62)
0
15
REF
.430 (10.9) MAX
.012 (.305)
.008 (.203)
.020 (.508)
.013 (.330)
PIN 1
.157 (3.99)
.150 (3.81)
.244 (6.20)
.228 (5.79)
.050 (1.27) BSC
.196 (4.98)
.189 (4.80)
.068 (1.73)
.053 (1.35)
.010 (.254)
.004 (.102)
0
8
REF
.010 (.254)
.007 (.203)
.050 (1.27)
.016 (.406)
.020 (.508)
.012 (.305)
.213 (5.41)
.205 (5.21)
.330 (8.38)
.300 (7.62)
PIN 1
.050 (1.27) BSC
.212 (5.38)
.203 (5.16)
.080 (2.03)
.070 (1.78)
.013 (.330)
.004 (.102)
0
8
REF
.010 (.254)
.007 (.178)
.035 (.889)
.020 (.508)
*Controlling dimension: millimeters
6.50 (.256)
6.25 (.246)
0.30 (.012)
0.19 (.008)
.65 (.026) BSC
1.05 (.041)
0.80 (.033)
3.10 (.122)
4.5 (.177)
2.90 (.114)
4.3 (.169)
0.15 (.006)
0.05 (.002)
1.20 (.047) MAX
0.20 (.008)
0.75 (.030)
0.09 (.004)
0.45 (.018)
0
8
REF
PIN 1
8P3, 8-lead, 0.300" Wide, Plastic Dual Inline
Package (PDIP)
Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-001 BA
8S1, 8-lead, 0.150" Wide, Plastic Gull Wing Small
Outline (JEDEC SOIC)
Dimensions in Inches and (Millimeters)
8S2, 8-lead, 0.200" Wide, Plastic Gull Wing Small
Outline (EIAJ SOIC)
Dimensions in Inches and (Millimeters)
8T, 8-lead, 0.170" Wide, Thin Shrink Small Outline
Package (TSSOP)
Dimensions in Millimeters and (Inches)*
Printed on recycled paper.
Atmel Corporation 2001.
Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty
which is detailed in Atmel's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors
which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does
not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted
by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel's products are not authorized for use as critical
components in life support devices or systems.
Atmel Headquarters
Atmel Product Operations
Corporate Headquarters
2325 Orchard Parkway
San Jose, CA 95131
TEL (408) 441-0311
FAX (408) 487-2600
Europe
Atmel SarL
Route des Arsenaux 41
Casa Postale 80
CH-1705 Fribourg
Switzerland
TEL (41) 26-426-5555
FAX (41) 26-426-5500
Asia
Atmel Asia, Ltd.
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimhatsui
East Kowloon
Hong Kong
TEL (852) 2721-9778
FAX (852) 2722-1369
Japan
Atmel Japan K.K.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
TEL (81) 3-3523-3551
FAX (81) 3-3523-7581
Atmel Colorado Springs
1150 E. Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL (719) 576-3300
FAX (719) 540-1759
Atmel Grenoble
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
TEL (33) 4-7658-3000
FAX (33) 4-7658-3480
Atmel Heilbronn
Theresienstrasse 2
POB 3535
D-74025 Heilbronn, Germany
TEL (49) 71 31 67 25 94
FAX (49) 71 31 67 24 23
Atmel Nantes
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
TEL (33) 0 2 40 18 18 18
FAX (33) 0 2 40 18 19 60
Atmel Rousset
Zone Industrielle
13106 Rousset Cedex, France
TEL (33) 4-4253-6000
FAX (33) 4-4253-6001
Atmel Smart Card ICs
Scottish Enterprise Technology Park
East Kilbride, Scotland G75 0QR
TEL (44) 1355-357-000
FAX (44) 1355-242-743
e-mail
literature@atmel.com
Web Site
http://www.atmel.com
BBS
1-(408) 436-4309
0172O08/01/xM
ATMEL
is the registered trademark of Atmel.
Other terms and product names may be the trademarks of others.