Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (28.09.99)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Accessories
Ordering Key
The SYSCON terminal emu-
lator software is used to con-
vert standard IBM compatible
PCs into terminals that
allow menu driven configura-
tion of the master generator
D 3890 ... and the modem
interface D 9091 ... .
Type Selection
Disc size
Ordering no.
3.5" Disc
D 9091 SW013
5.25" Disc
D 9091 SW015
Hardware Requirements
Standard IBM compatible PC (XT, AT)
DOS version: 3.1 or later
Disc drive: standard 3.5" or 5.25"
Serial port
Connection cable
Type: Dupline
Type no.
Disc size
Mode of Operation
In addition to the functions
that are performed with the D
3890 SW.. above, the SYS-
CON emulator software is
used to entirely configure the
Dupline
modem interface
unit D 9091.. . The configura-
tion procedure for either
Dupline
device is described
in detail in the respective user
manual. Therefore please refer
to the user manual for the
Dupline
modem interface
(MAN D 90xx) or the Dupline
master generator (MAN D
3890) for more information.
Software
Support software for D 7191
Optolinks to control and
monitor data from Dupline
installations of up to 63
Optolinks with 128 channels
each. Enabling the creation
of programs to dynamically
access the system in a struc-
tured way.
The support software assists
the user in creating his own
programs in either BASIC or
Pascal.
Type Selection
Disc size
Ordering no.
3.5" Disc
D 7191 SW023
5.25" Disc
D 7191 SW025
Hardware Requirements
Standard IBM compatible PC (XT, AT)
DOS version: 2.1 or later
Disc drive: standard 3.5" or 5.25"
One serial port
640 K Byte memory
Interface G 3491 0090
Optolink G 3491 0000
Ordering Key
Type: Dupline
Type no.
Disc size
Product Description
Mode of Operation
The Carlo Gavazzi Optolink
support software helps the
user to establish a communi-
cation program between a
standard PC and the Optolink.
This means that a complete
network of sensors and ac-
tuators can be directly con-
trolled from the PC. The soft-
ware gives the programmer
the opportunity to create his
own software by using some
of the support software files.
With the Demo file, reading
and controlling the Dupline
I/O status on each of the 128
channels for each Optolink is
performed.
Optolink Support Software
Type D 7191
D 9091 SW013
D 7191 SW023
SYSCON Terminal Emulator Software
Type D 9091
PDF 
ZIP