ADVANCED INFORMATION
DESCRIPTION:
The M-Densus series is a family of interchangeable memory modules. The 256 Megabit SDRAM is a member of
this family which utilizes the new and innovative space saving TSOP stacking technology. The modules are
constructed with 8 Meg x 16 SDRAMs.
This 128 Megabit based M-Densus module, the
DPSD16MX16TY5 has been designed to fit in the same
footprint as the 8 Meg x 16 SDRAM TSOP monolithic and
128 Megabit SDRAM based family of M-Densus modules.
This allows the memory board designer to upgrade the
memory in their products without redesigning the
memory board, thus saving time and money.
FEATURES:
Configuration Available:
16 Meg x 16 bit (with two Chip Selects)
Clock Frequency:
66
[1]
, 83
[1]
, 100, 125
[2]
, 133
[2]
MHz (max.)
PC100 and PC133 Compatible
3.3V Supply
LVTTL Compatible I/O
Four Bank Operation
Programmable Burst Type, Burst Length,
and CAS Latency
4096 Cycles / 64 ms
Auto and Self Refresh
Package: TSOP Leadless Stack
NOTES: [1] Available in Industrial Temperature Ranges Only.
[2] Available in Commercial Temperature Range Only.
PIN-OUT DIAGRAM
FUNCTIONAL BLOCK DIAGRAM
16Mx16, 7.5 - 15ns, P12, M-Densus
30A232-00
A
This document contains information on a product under consideration for
development at Dense-Pac Microsystems, Inc. Dense-Pac reserves the right
to change or discontinue information on this product without prior notice.
PIN NAMES
A0 - A11
Row Address:
A0 - A11
Column Address: A0 - A8
BA0, BA1
Bank Select Address
DQ0 - DQ15
Data In / Data Out
CAS
Column Address Strobes
RAS
Row Address Enables
WE
Data Write Enable
UDQM,
LDQM
Upper & Lower
Data Input/Output Mask
CKE
Clock Enable
CLK
System Clock
CS0-CS1
Chip Selects
V
CC
/V
SS
Power Supply/Ground
V
CCQ
/V
SSQ
Data Output Power/Ground
N.C./RFU
No Connect
Reserved for Future Use
256 Megabit Synchronous DRAM
DPSD16MX16TY5
M-Densus
High Density Memory Device
30A232-00
REV. A
1
DPSD16MX16TY5
M-Densus
Dense-Pac Microsystems, Inc.
ADVANCED INFORMATION
MECHANICAL DRAWING
Dense-Pac Microsystems, Inc.
7321 Lincoln Way, Garden Grove, California 92841-1431
(714) 898-0007 (800) 642-4477 FAX: (714) 897-1772 http://www.dense-pac.com
PART NUMBER DESCRIPTION
NOTES: [1] Available in Industrial Temperature Ranges Only. See Note 4.
[2] Available in Commercial Temperature Range Only.
[3] Contact your sales representative for supplier and manufacturer codes.
[4] Delivery of all industrial temperature ranges are subject to availability of screened components.
Standard TSOP Pad Layout is acceptable. When
possible, use the Dense-Pac recommended footprint as
shown. See Application Note 53A001-00 for further
30A232-00
REV. A
2
PDF 
ZIP