ChipFind - документация

Электронный компонент: MB89PV210

Скачать:  PDF   ZIP

Document Outline

DS07-12558-1E
FUJITSU SEMICONDUCTOR
DATA SHEET
8-bit Proprietary Microcontrollers
CMOS
F
2
MC-8L MB89210 Series
MB89215/P215/PV210
s
DESCRIPTION
The MB89210 series is a one-chip microcontroller that features a compact instruction set and contains a range
of peripheral functions including timers, a serial interface, A/D converters and external interrupts.
s
FEATURES
F
2
MC-8L CPU core
Maximum memory spaces
: 64 Kbytes
Minimum instruction execution time : 0.32
s to 5.12
s (at 12.5 MHz)
Interrupt processing time
: 2.88
s to 46.08
s (at 12.5 MHz)
I/O port
: Max 22
21-bit time base timer
8-bit PWM timer
8-/16-bit capture timer/counter : 2 ch
Watchdog timer
12-bit PPG timer
(Continued)
s
PACKAGE
30-pin Plastic SSOP
48-pin Ceramic MQFP
(FPT-30P-M02)
(MQP-48C-P02)
MB89210 Series
2
(Continued)
10-bit A/D converter : 8 ch
LIN-UART
8-bit serial I/O
External Interrupt : 3 ch
External or CR (built-in) oscillation clock, switchable
Low power consumption modes (stop modes, sleep modes)
Package : SSOP-30,MQFP-48
CMOS technology
MB89210 Series
3
s
PRODUCT LINEUP
* : The minimum operating voltage varies with the operating frequency, the function and the connected ICE.
Note : Unless otherwise stated, clock periods and conversion times are for 10 MHz operation with the internal clock
operating at maximum speed.
Part number
MB89215
MB89P215
MB89PV210
Parameter
Type
For mass products
(Mask ROM product)
One-time product
(for small-scale production)
Piggy back/
Evaluation product
(for development)
ROM capacity
16 Kbyte
(Built-in ROM)
16 Kbyte
(Built-in PROM)
32 Kbyte
(External EPROM)
RAM capacity
512byte
512byte
1.92Kbyte
CPU functions
Number of basic instructions
: 136
Instruction bit length
: 8 bits
Instruction length
: 1 to 3 bytes
Data bit length
: 1, 8, and 16 bits
Minimum instruction execution time : 0.32
s to 5.12
s (at 12.5 MHz)
Interruption processing time
: 2.88
s to 46.08
s (at 12.5 MHz)
Ports
General purpose I/O port
21 (also usable as resources) General purpose input port
1
21-bit time base timer
21 bits
Interrupt cycle : at 10 MHz (0.82 ms,3.3 ms,26.2 ms,419.4 ms)
Watchdog timer
Reset generation cycle : at 10 MHz (Min 419.4 ms)
8-bit PWM timer
8-bit interval timer operation (supports square wave output, operating clock period :
0.4
s to 25.6
s)
8-bit resolution PWM operation (conversion period : 102.4
s to 26.84
s )
8/16-bit capture timer
counter
8-bit capture timer/counter
1 channel
+
8-bit timer
or 16-bit capture timer/counter
1 channel
Capable of event count operation and square wave output using external clock input
with 8-bit timer 0 or 16-bit counter
LIN-UART
Full duplex, Synchronous/asynchronous transfer (with start/stop bit), Capable of
setting over 30,000 different baud rates using a 15-bit reload counter
Support for the LIN protocol, slave nodes, and LIN synch break/sync field detection
8-bit serial I/O
8-bit length, Selectable LSB first or MSB first
Transfer clock (0.8
s external, 0.8
s, 3.2
s, 12.8
s internal)
12-bit PPG timer
Output requency : Selectable pulth width and cycle (Cycle : 1.6
s to 419.3 ms )
External interrupt
circuit
3-channel (interrupt vector, request flag, requesr output acceptance)
Edge selectable (selectable rising, falling or both edge)
Can be use for recovery from stop or sleep mode (edge detection also available in
stop mode).
A/D converter
10-bit accurasy
8-channel
A/D conversion function (conversion time : 15.2
s/10 MHz)
Continuous activation by an 8-/16-bit timer/counter output or time base timer output
capable.
Standby mode
Sleep mode and Stop mode
Operating voltage *
3.5 V to 5.5 V
3.5 V to 5.5 V
3.5 V to 5.5 V
CR(built-in) oscillator
Yes
Yes
No
Peripheral functions
MB89210 Series
4
s
PACKAGES AND CORRESPONDING PRODUCTS
O : Yes
: No
* : Adapter for 48-pin to 30-pin conversion (manufactured by Sunhayato Corp.)
Part number : 48QF-30SOP-8L
Inquiry : Sunhayato Corp.
TEL
: (81)-3-3984-7791
FAX
: (81)-3-3971-0535
E-mail : adapter@sunhayato.co.jp
s
DIFFERENCES AMONG PRODUCTS
1.
Memory space
When this product is used in a piggy-back or other evaluation configuration, it is necessary to carefully confirm
the differences between the model being used and the product it is evaluating.
2.
Current Consumption
On the MB89P210, the additional current consumed by the EPROM is added at the connecting socket on the
back side.
When operating at low speed, the current consumption in the one-time PROM or EPROM models is greater
than on the mask ROM models. However, current consumption in sleep or stop modes is identical. However,
in sleep/stop mode the current consumption is the same.
Package
MB89215
MB89P215
MB89PV210
FPT-30P-M02
O
O
*
MQP-48C-P02
O
Power supply pins
Vcc,Vss
2
Vcc,Vss
2,AVcc,AVss
MB89210 Series
5
s
PIN ASSIGNMENT
(Continued)
(TOP VIEW)
(FPT-30P-M02)
27
26
25
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
9
10
11
12
28
13
14
16
15
29
30
Vss
C
X0
X1
MODA
P31
RST
P04/INT0
P05/INT1
P06/INT2
P07/EC0
P10/SCK
P11/SO
P12/SI
P13/TO0
P03/AN7
P21/AN1
P22/AN2
P23/AN3
P00/AN4
P01/AN5
P02/AN6
P17/PPG
P30/PWM/TO1
Vcc
Vss
P20/AN0
P14/UCK/EC1
P15/UO
P16/UI