C7884 series is a driver circuit specifically designed for the Hamamatsu current-output type NMOS linear image sensors (S3901 to S3904 series,
S8380/S8381 series). NMOS linear image sensors are self-scanning photodiode arrays integrated with a scanning circuit of N-channel MOS
transistors.
C7884 series supplies start pulses and 2-phase clock pulses necessary for image sensor operation. C7884 series also includes a signal
processing circuit to read out video signals from an image sensor in the electric charge accumulation mode.
C7884 series operates by input of a master start pulse, master clock pulse and connection to double power supply (12 V or 15 V).
C7884-20 and C7884-21 are multichannel detector heads incorporating driver circuit (C7884, C7884-01) developed for Hamamatsu NMOS linear
image sensor. C7884-20 and C7884-21 are designed especially for compactness, having an overall length as short as 40 mm or less. The
housing case also provides a shielding effect against external noise. As useful options, peripheral devices are available for driving C7884-20 and
C7884-21, and for the output signal processing.
Features
l High-precision operation (compared to C7883 series)
l Low noise (compared to C7883 series)
l Compact (compared to conventional type C4070)
l Double power supply (12 V or 15 V) operation
I M A G E S E N S O R
Driver circuit for NMOS linear image sensor
High-precision driver circuit for current-output type NMOS linear image sensor
C7884 series
C7884
I Selection guide
Type No.
Product name
Feature
C7884
Driver circuit
High precision driver circuit for current-output type NMOS linear
image sensors.
Has no input/output connector.
C7884G
C7884 + Pulse generator
A dedicated pulse generator is pre-mounted on C7884 driver circuit
board.
Has no input/output connector.
C7884-01
Low noise driver circuit
Low noise driver circuit for current-output type NMOS linear image
sensors.
Has no input/output connector.
C7884G-01
C7884-01 + Pulse generator
A dedicated pulse generator is pre-mounted on C7884-01 driver
circuit board.
Has no input/output connector.
C7884-20
Multichannel detector head
C7884 driver circuit board is installed in a shield case.
C7884-21
Multichannel detector head
C7884-01 driver circuit board is installed in a shield case.
Note)
1: Standard input/output connector is FAP-16-07#2 (made by Yamaichi, sold separately). Equivalent connectors are available
from other manufacturers.
2: Custom products with an input/output connector pre-mounted are available on request. Please consult our sales office.
3: When ordering along with a dedicated cable (A8226), C7884 series will be shipped with a mating connector pre-mounted.
4: We welcome custom requests (e.g. different supply voltage or gain). Feel free to contact our sales office.
5: When high-speed measurements are required, refer to C7883 series data sheet.
6: When using voltage-output type NMOS linear image sensors, refer to C7885 series data sheet.
1
Driver circuit for NMOS linear image sensor
C7884 series
MASTER CLOCK CLK
MASTER START Start
START st
CLOCK 1
CLOCK 2
RESET
CLAMP
Trigger
VIDEO OUTPUT Data Video
END OF SCAN EOS
I Timing chart
KACCC0119EA
I Specifications (Ta=25 C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Positive power supply
+Vs
+11.5
+12.0
+15.5
V
Supply
voltage
Negative power supply
-Vs
+11.5
+12.0
+15.5
V
P ositive po w er s upply
+Is
+12 V
-
30
40
mA
C7884
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
P ositive po w er s upply
+Is
+12 V
-
60
80
mA
C7884G
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
P ositive po w er s upply
+Is
+12 V
-
20
30
mA
C7884-01
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
P ositive po w er s upply
+Is
+12 V
-
45
60
mA
C 7884 G-01
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
P ositive po w er s upply
+Is
+12 V
-
30
40
mA
C7884-20
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
P ositive po w er s upply
+Is
+12 V
-
20
30
mA
Current
consu mption
C7884-21
N e g ativ e po w er supply
-Is
-12 V
-
10
20
mA
S3902/S3903 series,
master clock frequency: 4 MHz
-
-
1
MHz
C7884
C7884-20
-
S3901/S3904 series,
master clock frequency: 2 MHz
-
-
500
kHz
Operation frequency
C7884-01
C7884-21
-
master clock frequency: 250 kHz
-
-
62.5
kHz
Gain
G
0.3
V/pC
Operating temperature
Topr
0 to +50 *
C
Storage temperature
Tstg
-10 to +60 *
C
* No condensation
2
Driver circuit for NMOS linear image sensor
C7884 series
Terminal No.
Terminal name
Description
1
A. GND
Analog ground
2
+12 V or +15 V
Power supply
3
A. GND
Analog ground
4
-12 V or -15 V
Power supply
5
A. GND
Analog ground
6
Data Video
Analog video signal output; positive polarity
7
A. GND
Analog ground
8
A. GND
Analog ground
9
D. GND
Digital ground
10
EOS
Digital output signal indicating end of scan; negative logic
11
D. GND
Digital ground
12
Trigger
Digital output signal for A/D conversion; positive logic
13
D. GND
Digital ground
14
CLK
Digital input signal for operating the circuit at the rising edge (in case of
C7884G, C7884G-01, output signal)
15
D. GND
Digital ground
16
Start
Digital input signal for initializing the circuit; positive logic. (in case of
C7884G, C7884G-01, output signal)
Interval of these pulses equals the integration time of the sensor.
I Dimensional outlines and input/output signal descriptions (unit: mm)
(2 ) 3.6
63.5
50.8
55.88
7.62
16
15
2
1
(4 ) C3
7.62
7.62
KACCA0086EA
55.88
7.62
63.5
1.6
10.0
1.6
25.4
25.4
(2 ) 3.6
(4 ) C3
7.62
7.62
KACCA0106EA
C7884, C7884-01
C7884G, C7884G-01
3
Driver circuit for NMOS linear image sensor
C7884 series
Terminal No.
Terminal name
Description
1
NC
No connection
2
Data video
Analog video signal output; positive polarity
3
+12 V (+15 V)
Positive power supply
4
-12 V (-15 V)
Negative power supply
5
NC
No connection
6
Start
Digital input signal for initializing the current; positive logic
7
CLK
Digital input signal for operating the circuit at the rising edge
8
EOS
Digital output signal indicating end of scan; negative logic
9
A. GND
Analog ground
10
A. GND
Analog ground
11
Shield
Case shield
12
D. GND
Digital ground
13
D. GND
Digital ground
14
D. GND
Digital ground
15
Trigger
Digital output signal for A/D conversion; positive logic
75.0
(2 ) M3
EFFECTIVE LENGTH 10
45.0
25.0
D-SUB 15 PIN SOCKET TYPE
46.0
75.0
14.0
65.0
90PCD
(4 ) 3.5 PIERCE
(8 ) R3
(4 ) C7
4
C7884-20/-21
KACCA0112EA
KACCC0069EA
I Pin assignment of "Signal I/O" connector (C7884-20/-21, 15 pin D-sub socket type)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2002 Hamamatsu Photonics K.K.
Cat. No. KACC1075E01
Apr. 2002 DN
Dedicated cable
A8226
5
Connector on board: UFS-16B-01
Input/output signal connector: BNC (Start, CLK, Trigger, EOS, Data Video)
Power supply: lose wire cable
Cable length: 1 m
Note) When making a simple in-circuit evaluation of NMOS linear image sensors without any troublesome soldering, use
C7883G, C7884G, C7884G-01 or G7885G in combination with A8226.
All you have to do is just insert an NMOS linear image sensor into the socket and connect the cables to an oscilloscope,
power supply and AD converter. Note that NMOS linear image sensors are sold separately.
Dedicated cable A8226
C7884G used in combination with A8226
PDF 
ZIP