CCD multichannel detector head C9265 series employs a 2/3-inch frame transfer CCD (S7987-01) for NTSC B/W and can be used in a wide
range of applications including high-speed imaging, bio-photon imaging and semiconductor inspection. The CCD used in C9265 series is
sensitive in the ultraviolet region (down to 130 nm *
1
) making C9265 series ideal for applications involving UV light source and UV lasers.
As soon as power is turned on, C9265 series begins to operate in free running mode with a preset integration time and outputs continuous image
data to an external unit. Image data is output in 12-bit parallel format (Data 11-Data 0, data conforming to RS-422 or LVDS) along with various
timing signals for image acquisition (VSYNC, HSYNC, PCLK), allowing easy connection to commercially available frame grabbers. All camera
settings can be made through serial communication ports (RS-232C).
In addition to various external trigger functions, C9265 series also provides one digital output useful in diverse applications. Furthermore, C9265
series has a sub-array binning to enhance the frame rate and computer-controlled gain and offset adjustments.
The CCD mounted in C9265 series operates at high speeds and produces considerable heat so dark current increases in the CCD. To minimize
dark current caused by this heat, a temperature control module is also built into C9265 series to maintain the CCD temperature near room
temperatures (Tc=+10 C).
The camera body is compact yet designed to radiate heat efficiently away from the internal circuit and sensor. The CCD focal plane is flush with
the front panel of the camera body making optical design easier.
Features
l High UV sensitivity: sensitive down to 130 nm *
1
l High resolution
l Fast frame rate: Up to 25 fps (frames per second)
l Sub-array binning: 1 1, 2 2
l Various trigger modes
l Sensor temperature control: +10 C 0.1 C (Ta=+25 C)
l Easy handling
Controllable from PC (RS-232C)
l Small and lightweight
Applications
l High-speed UV imaging
l Semiconductor inspection
l Microscope
I M A G E S E N S O R
Designed for back-thinned CCD area image sensor
C9265 series
CCD multichannel detector head
PRELIMINARY DATA
Feb. 2003
The table below shows CCD area image sensor applicable for C9265 series.
Since C9265 series does not include a CCD area image sensor, so select the desired sensor and order it separately.
CCD area image sensor
Type No.
Number of pixels
Number of active pixels
Active area
[mm (H) mm (V)]
S7987-01
680 500
658 490
9.212 6.860
*1: When CCD sensor faceplate is removed.
1
CCD multichannel detector head
C9265 series
2
I Specifications
Parameter
C9265
C9265-01
CCD structure
Back-thinned FFT-CCD, MPP mode
Number of total pixels
680 (H) 500 (V)
Number of active pixels
658 (H) 490 (V)
Pixel size
14 (H) 14 (V) m
Active area
9.212 (H) 6.860 (V) mm
Scanning rate
11 MHz
Maximum frame rate
25 frame/s at 11 MHz
AD conversion resolution
12-bit
Interface
RS-422
LVDS
Spectral response range
200 to 1100 nm
Full well capacity
65,000 e
-
Conversion gain
15.9 e
-
/ADU (65,000 e
-
at 4095 ADC counts)
Dark current
2,000 e
-
/pixel/s at +25 C
Readout noise
100 e
-
(6.3 ADU) at 11 MHz
Cooling temperature
+10 C at room temperature (+25 C, natural cooling, fan OFF)
Digital circuit
D. +5 V 0.25 V (800 mA Max.)
Analog circuit
A. +15 V 0.5 V (400 mA Max.)
Analog circuit
A. -15 V 0.5 V (400 mA Max.)
Supply
voltage
Cooling circuit
P. +5 V 0.25 V (2.8 A Max.)
Storage temperature
-20 C to +70 C
Operating temperature
0 C to +50 C
Operating humidity
70 % Max. (no condensation)
Dimension
90 (H) 100 (W) 120 (D) mm
Weight
Approx. 800 g
I Pin connection of "DIGITAL I/O" connector (3M 10250-5202JL, 50-pin female connector)
Pin No.
Signal name
Pin No.
Signal name
1
RXD
26
RTS
2
TXD
27
CTS
3
DGND
28
DGND
4
VSYNC+
29
VSYNC-
5
HSYNC+
30
HSYNC-
6
PCLK+
31
PCLK-
7
TRIGGER IN+
32
TRIGGER IN-
8
PULSE OUT+
33
PULSE OUT-
9
/RESET+
34
/RESET-
10
Data 0+(LSB)
35
Data 0-(LSB)
11
Data 1+
36
Data 1-
12
Data 2+
37
Data 2-
13
Data 3+
38
Data 3-
14
Data 4+
39
Data 4-
15
Data 5+
40
Data 5-
16
Data 6+
41
Data 6-
17
Data 7+
42
Data 7-
18
Data 8+
43
Data 8-
19
Data 9+
44
Data 9-
20
Data 10+
45
Data 10-
21
Data 11+(MSB)
46
Data 11-(MSB)
22
NC
47
NC
23
NC
48
NC
24
NC
49
NC
25
NC
50
NC
CCD multichannel detector head
C9265 series
3
I Pin connection of "RS-232C" connector (OMRON XM2C-0912-111, 9-pin D-sub male connector)
Pin No.
Signal name
Pin No.
Signal name
1
N
C
6
N
C
2
RXD
7
RTS
3
TXD
8
CTS
4
NC
9
NC
5
GN D
-
-
I Pin connection of "POWER" connector (HIROSE RM12BRD-7S, 7-pin female connector)
Pin No.
Signal name
1
D.+5 V
2
A. +15 V
3
P. +5 V
4
P. GND
5
A. -15 V
6
D. GND
7
A. GN D
I Dimensional outline (unit: mm)
KACCA0125EA
50.0
50.0
100.0
120.0
0.5 (FOCAL PLANE)
2.4
90.0
(4 ) M3 DEPTH 4
POWER
TRIGGER IN
PULSE OUT
RS232C
DIGITAL I/O
CCD multichannel detector head
C9265 series
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2003 Hamamatsu Photonics K.K.
Cat. No. KACC1088E01
Feb. 2003 DN
4
I Hardware setup
Use this drawing to set up the hardware used with C8677 series.
DC+5 V, 15 V
DC POWER SUPPLY
PULSE GENERATOR
EXTERNAL SHUTTER
LASER TRIGGER CIRCUIT, etc.
SERIAL COMMUNICATION
PC + FRAME GRABBER, etc.
VSYNC
HSYNC
PCLK
DATA11-DATA0
POWER
TRIGGER IN
PULSE OUT
RS232C
DIGITAL I/O
KACCC1085EA
PDF 
ZIP