ChipFind - документация

Электронный компонент: HMC251MS8

Скачать:  PDF   ZIP
MICROWAVE CORPORATION
10 - 2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
HMC251MS8
GaAs MMIC SMT
DIVIDE-BY-2, 3.0 - 6.5 GHz
v01.0801
General Description
Features
Functional Diagram
Divide-By-Two
Low Phase Noise: -130 dBc/Hz @ 10KHz
Single Positive Bias Voltage: +5.0V @ 27 mA
Miniature Small Outline Pakcage: MSOP8
Electrical Specifi cations
,
T
A
= +25 C, Vdd = +5.0V, 50 Ohm System
Typical Applications
The HMC251MS8 is ideal for:
Wireless
Local
Loop
UNII & HiperLAN
ISM
VSAT
Note 1. Output Power Measured at half the Input Frequency.
The HMC251MS8 is a low noise divide-by-2 GaAs
MMIC prescaler in an 8 lead surface mount MSOP
plastic package. This device operates from 3.0 to
6.5 GHz (input frequency) with a single +5.0 V DC
supply while drawing only 27 mA of current. The low
residual phase noise of this prescaler helps the user
maintain good system noise performance.
Parameter
Condition
Min
Typical
Max
Units
Input Frequency Range
3.0 - 6.5
GHz
Output Frequency Range
1.5 - 3.25
GHz
Operating Input Power Range
Fin = 3.0 - 4.0 GHz
Fin = 4.0 - 5.0 GHz
Fin = 5.0 - 6.0 GHz
Fin = 6.0 - 6.5 GHz
6
-2
-8
-3
10
10
10
7
dBm
dBm
dBm
dBm
Output Power for Minimum Input
Power Level (Note 1)
Fin = 3.0 - 4.0 GHz
Fin = 4.0 - 5.0 GHz
Fin = 5.0 - 6.0 GHz
Fin = 6.0 - 6.5 GHz
-12
-14
-16
-17
-8.0
-7.7
-8.2
-8.5
-3
-3
-3
-3
dBm
dBm
dBm
dBm
Single-Side-Band Phase Noise
Fin = 5.0 - 6.0 GHz
Offset from carrier = 10KHz
-130
dBc/Hz
Supply Current (Idd)
Vdd = -5.0 Vdc
27
33
mA
MICROWAVE CORPORATION
10 - 3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ.
DIVIDERS & DETECT
ORS - SMT
-14
-12
-10
-8
-6
-4
-2
0
3
3.5
4
4.5
5
5.5
6
6.5
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
+85 C
-40 C
+25 C
-30
-20
-10
0
10
20
3
3.5
4
4.5
5
5.5
6
6.5
MINIMUM INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
+85 C
-40 C
+25 C
Guaranteed
Operating
Window
-14
-12
-10
-8
-6
-4
-2
0
3
3.5
4
4.5
5
5.5
6
6.5
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-160
-150
-140
-130
-120
-110
-100
-90
-80
10
1
10
2
10
3
10
4
10
5
10
6
OFFSET FROM CARRIER (Hz)
HMC251MS8
v01.0801
GaAs MMIC SMT
DIVIDE-BY-2, 3.0 - 6.5 GHz
*Note: Output Power Measured @ fi n/2
Output Power vs. Frequency
@ Minimum Input Power Level
Minimum Input
Power vs. Input Frequency
Single-Side-Band Phase Noise
vs. Offset from Carrier, fi n= 5 to 6 GHz
Output Power for Input Power= +10 dBm*
MICROWAVE CORPORATION
10 - 4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
-10
-5
0
5
10
15
20
OUTPUT POWER (dBm)
INPUT POWER (dBm)
Feedthru Signal @ 5.2 GHz
Output Power @ 2.6 GHz
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
-10
-5
0
5
10
15
20
OUTPUT POWER (dBm)
INPUT POWER (dBm)
Feedthru Signal @ 5.8 GHz
Output Power @ 2.9 GHz
GaAs MMIC SUB-HARMONICALLY PUMPED MIXER 17 - 25 GHz
HMC251MS8
v01.0801
GaAs MMIC SMT
DIVIDE-BY-2, 3.0 - 6.5 GHz
3.0 GHz
6.5 GHz
j5
j2
j1
j0.5
j0.2
0
0.2
0.5
1
2
5
-j0.2
-j0.5
-j1
-j2
-j5
3.25 GHz
1.5 GHz
j5
j2
j1
j0.5
j0.2
0
0.2
0.5
1
2
5
-j0.2
-j0.5
-j1
-j2
-j5
*S-Parameter Data is Available @ www.hittite.com
Output Power vs. Input Power,
Input Frequency= 5.2 GHz
Output Power vs. Input Power,
Input Frequency= 5.8 GHz
RF IN S-Parameters *
RF OUT S-Parameters *
MICROWAVE CORPORATION
10 - 5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ.
DIVIDERS & DETECT
ORS - SMT
v01.0801
GaAs MMIC SMT
DIVIDE-BY-2, 3.0 - 6.5 GHz
HMC251MS8
Absolute Maximum Ratings
Outline Drawing
Operating Notes:
1. With no input signal, or input signals below the minimum
input power level, the prescaler will self-oscillate.
2. DC blocks on the RF ports are not required but are recom-
mended if DC voltages exceeding 8 volts are present.
Application Circuit
Vdd
+8 Vdc
Maximum Input Power
(Vdd = +5.0 Vdc)
20 dBm
Storage Temperature
-65 to +150 C
Operating Temperature
-40 to +85 C
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
MICROWAVE CORPORATION
10 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
The circuit board used in the fi nal application should
be generated with proper RF circuit design techniques.
Signal lines at RF IN and RF OUT should have 50 ohm
impedance and the package ground leads should be
connected directly to the ground plane similar to that
shown. The evaluation circuit board shown is available
from Hittite upon request.
Eval Board Layout
(Top View)
List Of Materials
v01.0801
GaAs MMIC SMT
DIVIDE-BY-2, 3.0 - 6.5 GHz
HMC251MS8
Item
Description
J1, J2
PC Mount SMA Connector
J3, J4
DC Pin
C1, C2
330 pF capacitor, 0603 Pkg.
U1
HMC251MS8 Prescaler
PCB*
102285 Eval Board
* Circuit Board Material: 4350