ChipFind - документация

Электронный компонент: SLE66C640PC

Скачать:  PDF   ZIP
Security & Chip Card ICs
SLE 66C640P
16-Bit Security Controller
with Memory Management and Protection Unit
in 0.22 m CMOS Technology
136-Kbytes ROM, 4352 bytes RAM, 64-Kbytes EEPROM
Short Product Information 08.01
SLE 66C640P Short Product Information
Ref.: SPI SLE 66C640P 0801.doc
This document contains preliminary information on a new product under development.
Details are subject to change without notice.
Revision History:
Current Version 08.01
Previous Releases:
Page
Subjects (changes since last revision)
Important: Further information is confidential and on request. Please contact:
Infineon Technologies AG in Munich, Germany,
Security & Chip Card ICs,
Tel +49 - (0)89 234-80000
Fax +49 - (0)89 234-81000
E-Mail: security.chipcard.ics@infineon.com
Edition 2001
Published by Infineon Technologies AG, CC Applications Group
St.-Martin-Strasse 53, D-81541 Mnchen
Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of
that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
SLE 66C640P
Short Product Information
3 / 8
08.01
16-Bit Security Controller with MMU in 0.22m CMOS Technologie
136 Kbytes ROM, 4352 bytes RAM, 64 Kbytes EEPROM
Features
16-bit microcomputer in 0.22 m CMOS
technology
Instruction set opcode compatible with
standard SAB 8051 processor
Enhanced 16-bit arithmetic
Additional powerful instructions optimized
for chip card applications
Dedicated, non-standard architecture with
execution time 6 times faster (18 times
by PLLmax)
than standard SAB 8051
processor at external same clock
134 Kbytes User ROM for application
programs
Additional 2 Kbytes reserved ROM for
Resource Management System (RMS+
light) with intelligent EEPROM write/erase
routines
64 Kbytes Slim-EEPROM
4 Kbytes XRAM, 256 Bytes IRAM
Memory Management and Protection
Unit (MMU)
CRC Module
Interrupt Module
Two 16-bit Autoreload Timer
PLL
Power saving sleep mode
External clock frequency 1 to 7.5 MHz
for internal clock
10 MHz
UART for handling serial interface in
accordance with ISO/IEC 7816 part 3
supporting transmission protocols T=1
and T=0
I/O routines realized in software executable
Supply voltage range: 2.7 V to 5.5 V
Current consumption
< 10mA @ 5.5 V
< 6 mA @ 3.3 V
Temperature range: -25 to +85C
ESD protection larger than 6 kV
Slim-EEPROM
Reading, erasing and writing byte by byte
Flexible page mode for 1 to 64 bytes
write/erase operation
32 bytes security area (OTP)
Fast personalization mode
Erase + Write time < 4.5 ms
Minimum of 500.000 write/erase cycles at
25C
Data retention for a minimum of 10 years
EEPROM programming voltage generated on
chip
Memory Management and Protection Unit
Addressable memory up to 1 Mbyte
Separation OS (system) and application
(user)
System routines called by traps
OS can restrict access to peripherals in
application mode
Code execution from XRAM possible
Security Features
Operation state monitoring mechanism
Low and high voltage sensors
Frequency sensors and filters
Glitch Sensor
Memory Security
16 bytes security PROM, hardware protected
Unique chip identification number for each
chip
MED - memory encryption/decryption device
for XRAM, ROM and EEPROM
True Random Number Generator with
Firmware test function
Security optimised layout and layout
scrambling
SLE 66C640P
Short Product Information
4 / 8
08.01
Testmode
Irreversible Lock - Out of testmode
Anti Snooping
HW-countermeasures against SPA/DPA-,
Timing- and DFA-attacks (differential fault
analysis DFA)
CRC Module
Non standard dedicated Smart Card CPU
Core
Support
HW-& SW-Tools (Emulator, ROM Monitor,
Card Emulator, Simulator, Softmasking)
Application notes
Supported Standards
ISO/IEC 7816
EMV 2000
GSM 11.1x
ETS I TS 102 221
Document References
Confidential Data Book SLE 66CxxxP
Qualification report
Chip delivery specification for wafer with
chip-layout (die size, orientation,...)
Module specification containing description
of package, etc.
Qualification report module
Development Tools Overview
Short Product Information Software
Development Kit SDK CC
Short Product Information Card Emulator
CE66P
Short Product Information ROM Monitor
RM66P
Short Product Information Emulator ET66P
Hitex or ET66P KSC
Short Product Information Smart Mask
Package
SLE 66C640P
Short Product Information
5 / 8
08.01
Ordering Information
Type
Package
1
Voltage
Range
Temperature
Range
Frequency Range
(ext. clock frequency)
SLE 66C640P M5
M5
SLE 66C640P C
die
2.7 V - 5.5 V 25C to + 70C 1 MHz - 5 MHz
SLE 66C640P-T85 M5
M5
SLE 66C640P-T85 C
die
2.7 V - 5.5 V 25C to + 85C 1 MHz - 5 MHz
SLE 66C640P-F7 M5
M5
SLE 66C640P-F7 C
die
2.7 V - 5.5 V 25C to + 70C 1 MHz 7.5 MHz
Production sites:
Dresden SLE66CxxxP
UMC Taiwan SLE66CxxxPU
1
available as wire-bonded module (M5) for embedding in plastic cards or as die (C) for customer packaging