1
FN9262.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL6326
4-Phase PWM Controller with 8-Bit DAC
Code Capable of Precision DCR
Differential Current Sensing
The ISL6326 controls microprocessor core voltage regulation
by driving up to 4 synchronous-rectified buck channels in
parallel. Multiphase buck converter architecture uses
interleaved timing to multiply channel ripple frequency and
reduce input and output ripple currents. Lower ripple results in
fewer components, lower component cost, reduced power
dissipation, and smaller implementation area.
Microprocessor loads can generate load transients with
extremely fast edge rates. The ISL6326 utilizes Intersil's
proprietary Active Pulse Positioning (APP) and Adaptive
Phase Alignment (APA) modulation scheme to achieve the
extremely fast transient response with fewer output capacitors.
Today's microprocessors require a tightly regulated output
voltage position versus load current (droop). The ISL6326
senses the output current continuously by utilizing patented
techniques to measure the voltage across the dedicated
current sense resistor or the DCR of the output inductor.
Current sensing provides the needed signals for precision
droop, channel-current balancing, and overcurrent
protection. A programmable integrated temperature
compensation function is implemented to effectively
compensate for the temperature coefficient of the current
sense element. The current limit function provides the
overcurrent protection for the individual phase.
A unity gain, differential amplifier is provided for remote
voltage sensing. Any potential difference between remote
and local grounds can be completely eliminated using the
remote-sense amplifier. Eliminating ground differences
improves regulation and protection accuracy. The threshold-
sensitive enable input is available to accurately coordinate
the start up of the ISL6326 with any other voltage rail.
Dynamic-VIDTM technology allows seamless on-the-fly VID
changes. The offset pin allows accurate voltage offset
settings that are independent of VID setting.
Features
Proprietary Active Pulse Positioning and Adaptive Phase
Alignment Modulation Scheme
Precision Multiphase Core Voltage Regulation
- Differential Remote Voltage Sensing
-
0.5% System Accuracy Over Life, Load, Line and
Temperature
- Adjustable Precision Reference-Voltage Offset
Precision resistor
or DCR Current Sensing
- Accurate Load-Line Programming
- Accurate Channel-Current Balancing
- Differential Current Sense
Microprocessor Voltage Identification Input
- Dynamic VIDTM Technology
- 8-Bit VID Input with Selectable VR11 Code and
Extended VR10 Code at 6.25mV Per Bit
Thermal Monitoring
Integrated Programmable Temperature Compensation
Overcurrent Protection and Channel Current Limit
Overvoltage Protection
2, 3 or 4 Phase Operation
Adjustable Switching Frequency up to 1MHz Per Phase
Package Option
- QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad
Flat No Leads - Product Outline
- QFN Near Chip Scale Package Footprint; Improves
PCB Efficiency, Thinner in Profile
Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART NUMBER
(Note)
PART
MARKING
TEMP.
(C)
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL6326CRZ
ISL6326CRZ
0 to70 40 Ld 6x6 QFN L40.6x6
ISL6326IRZ
ISL6326IRZ -40 to 85 40 Ld 6x6 QFN L40.6x6
Add "-T" suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Data Sheet
April 21, 2006
PDF 
ZIP
