SPEC NO: DSAD1117
REV NO: V.2 DATE: MAR/12/2005 PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1204000415
Package Dimensions
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
APHK1608TGC GREEN
Description
The Green source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is
0
.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
1.6x0.8mm SMD CHIP LED LAMP
Features
1.6mmx0.8mm SMT LED, 0.7mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACK LIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAD1117
REV NO: V.2 DATE: MAR/12/2005 PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1204000415
Electrical / Optical Characteristics at T
A
=25C
Absolute Maximum Ratings at T
A
=25C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No.
Dice
Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min.
Typ.
2
1/2
APHK1608TGC
GREEN (InGaN)
WATER CLEAR
70
150
90
Symbol
Parameter
Device
Typ.
Max.
Test Conditions
Units
peak
Peak Wavelength
Green
500
nm
I
F
=20mA
D
Dominant Wavelength
Green
505
nm
I
F
=20mA
1/2
Spectral Line Half-width
Green
30
nm
I
F
=20mA
C
Capacitance
Green
56
pF
V
F
=0V;f=1MHz
V
F
Forward Voltage
Green
3.6
4.4
V
I
F
=20mA
I
R
Reverse Current
Green
10
uA
V
R
= 5V
Parameter
Green
Units
Power dissipation
110
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
Reverse Voltage
5
V
Operating/Storage Temperature
-40C To +85C
SPEC NO: DSAD1117
REV NO: V.2 DATE: MAR/12/2005 PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1204000415
APHK1608TGC
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
PDF 
ZIP