ChipFind - документация

Электронный компонент: MCR100-6

Скачать:  PDF   ZIP
www.docs.chipfind.ru
background image
1
Motorola Thyristor Device Data
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
PNPN devices designed for high volume, line-powered consumer applications such
as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and
sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package
which is readily adaptable for use in automatic insertion equipment.
Sensitive Gate Trigger Current -- 200
A Maximum
Low Reverse and Forward Blocking Current -- 100
A Maximum, TC = 125
C
Low Holding Current -- 5 mA Maximum
Glass-Passivated Surface for Reliability and Uniformity
MAXIMUM RATINGS
(TJ = 25
C unless otherwise noted.)
Rating
Symbol
Value
Unit
Peak Repetitive Forward and Reverse Blocking Voltage(1)
(TJ = 25 to 125
C, RGK = 1 k
MCR100-3
MCR100-4
MCR100-6
MCR100-8
VDRM
and
VRRM
100
200
400
600
Volts
Forward Current RMS (See Figures 1 & 2)
(All Conduction Angles)
IT(RMS)
0.8
Amps
Peak Forward Surge Current, TA = 25
C
(1/2 Cycle, Sine Wave, 60 Hz)
ITSM
10
Amps
Circuit Fusing Considerations
(t = 8.3 ms)
I2t
0.415
A2s
Peak Gate Power -- Forward, TA = 25
C
PGM
0.1
Watts
Average Gate Power -- Forward, TA = 25
C
PGF(AV)
0.01
Watt
Peak Gate Current -- Forward, TA = 25
C
(300
s, 120 PPS)
IGFM
1
Amp
Peak Gate Voltage -- Reverse
VGRM
5
Volts
Operating Junction Temperature Range @ Rated VRRM and VDRM
TJ
40 to +125
C
Storage Temperature Range
Tstg
40 to +150
C
Lead Solder Temperature
(
t
1/16
I
from case, 10 s max)
--
+230
C
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate
voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current
source such that the voltage ratings of the devices are exceeded.
Preferred devices are Motorola recommended choices for future use and best overall value.
Order this document
by MCR100/D
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Motorola, Inc. 1995
MCR100
Series
SCRs
0.8 AMPERE RMS
100 thru 600 VOLTS
*Motorola preferred devices
CASE 29-04
(TO-226AA)
STYLE 10
K
G
A
K
G
A
*
background image
MCR100 Series
2
Motorola Thyristor Device Data
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction to Case
R
JC
75
C/W
Thermal Resistance, Junction to Ambient
R
JA
200
C/W
ELECTRICAL CHARACTERISTICS (TC = 25
C, RGK = 1 k
unless otherwise noted.)
Characteristic
Symbol
Min
Max
Unit
Peak Forward or Reverse Blocking Current
(VAK = Rated VDRM or VRRM)
TC = 25
C
TC = 125
C
IDRM, IRRM
--
--
10
100
A
A
Forward "On" Voltage(1)
(ITM = 1 A Peak @ TA = 25
C)
VTM
--
1.7
Volts
Gate Trigger Current (Continuous dc)(2)
TC = 25
C
(Anode Voltage = 7 Vdc, RL = 100 Ohms)
IGT
--
200
A
Gate Trigger Voltage (Continuous dc)
TC = 25
C
(Anode Voltage = 7 Vdc, RL = 100 Ohms)
TC = 40
C
(Anode Voltage = Rated VDRM, RL = 100 Ohms)
TC = 125
C
VGT
--
--
0.1
0.8
1.2
--
Volts
Holding Current
TC = 25
C
(Anode Voltage = 7 Vdc, initiating current = 20 mA)
TC = 40
C
IH
--
--
5
10
mA
1. Forward current applied for 1 ms maximum duration, duty cycle
p
1%.
2. RGK current is not included in measurement.
C
T
, MAXIMUM
ALLOW
ABLE CASE
TEMPERA
TURE ( C)
60
120
180
0.4
40
50
60
70
80
90
100
110
0
0.1
0.3
0.2
120
0.5
= 30
90
dc
CASE MEASUREMENT
POINT -- CENTER OF
FLAT PORTION
IT(AV), AVERAGE ON-STATE CURRENT (AMP)
FIGURE 1 MCR100-7, MCR100-8 CURRENT DERATING
(REFERENCE: CASE TEMPERATURE)
= CONDUCTION ANGLE
TEMPERA
TURE ( C)
A
20
IT(AV), AVERAGE ON-STATE CURRENT (AMP)
0.4
0
0.1
0.3
0.2
= 30
120
40
60
80
100
120
FIGURE 2 MCR100-7, MCR100-8 CURRENT DERATING
(REFERENCE: AMBIENT TEMPERATURE)
T
, MAXIMUM
ALLOW
ABLE
AMBIENT
60
90
TYPICAL PRINTED
CIRCUIT BOARD
MOUNTING
= CONDUCTION ANGLE
180
dc
background image
MCR100 Series
3
Motorola Thyristor Device Data
PACKAGE DIMENSIONS
CASE 29-04
(TO226AA)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
F
B
K
G
H
SECTION XX
C
V
D
N
N
X X
SEATING
PLANE
DIM
MIN
MAX
MIN
MAX
MILLIMETERS
INCHES
A
0.175
0.205
4.45
5.20
B
0.170
0.210
4.32
5.33
C
0.125
0.165
3.18
4.19
D
0.016
0.022
0.41
0.55
F
0.016
0.019
0.41
0.48
G
0.045
0.055
1.15
1.39
H
0.095
0.105
2.42
2.66
J
0.015
0.020
0.39
0.50
K
0.500
12.70
L
0.250
6.35
N
0.080
0.105
2.04
2.66
P
0.100
2.54
R
0.115
2.93
V
0.135
3.43
1
STYLE 10:
PIN 1. CATHODE
2. GATE
3. ANODE
background image
MCR100 Series
4
Motorola Thyristor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different
applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
MCR100/D
*MCR100/D*