ChipFind - документация

Электронный компонент: R1120N501B-TL

Скачать:  PDF   ZIP
APPLICATION MANUAL
LOW NOISE 150mA
L.D.O REGULATOR
R1120N SERIES
NO. EA-047-9803
ELECTRONIC DEVICES DIVISION
NOTICE
1. The products and the product specifications described in this application manual are subject to change or
discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to
use the products, please refer to Ricoh sales representatives for the latest information thereon.
2. This application manual may not be copied or otherwise reproduced in whole or in part without prior written
consent of Ricoh.
3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or
otherwise taking out of your country the products or the technical information described herein.
4. The technical information described in this application manual shows typical characteristics of and example
application circuits for the products. The release of such information is not to be construed as a warranty of or a
grant of license under Ricoh's or any third party's intellectual property rights or any other rights.
5. The products listed in this document are intended and designed for use as general electronic components in
standard applications (office equipment, computer equipment, measuring instruments, consumer electronic
products, amusement equipment etc.). Those customers intending to use a product in an application requiring
extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of
the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic
control system, automotive and transportation equipment, combustion equipment, safety devices, life support
system etc.) should first contact us.
6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor
products are likely to fail with certain probability. In order prevent any injury to persons or damages to property
resulting from such failure, customers should be careful enough to incorporate safety measures in their design,
such as redundancy feature, fire-containment feature and fail-safe feature. We do not assume any liability or
responsibility for any loss or damage arising from misuse or inappropriate use of the products.
7. Anti-radiation design is not implemented in the products described in this application manual.
8. Please contact Ricoh sales representatives should you have any questions or comments concerning the
products or the technical information.
June 1995
R1120N SERIES
APPLICATION MANUAL
CONTENTS
OUTLINE
......................................................................................................
1
FEATURES
...................................................................................................
1
APPLICATIONS
.............................................................................................
1
BLOCK DIAGRAM
.........................................................................................
2
SELECTION GUIDE
.......................................................................................
2
PIN CONFIGURATION
...................................................................................
3
PIN DESCRIPTION
........................................................................................
3
ABSOLUTE MAXIMUM RATINGS
...................................................................
4
ELECTRICAL CHARACTERISTICS
................................................................
5
OPERATION
..................................................................................................
7
TEST CIRCUITS
............................................................................................
8
TYPICAL CHARACTERISTICS
.......................................................................
9
1) Output Voltage vs. Output Current
......................................................................
9
2) Output Voltage vs. Input Voltage
........................................................................
9
3) Dropout Voltage vs. Output Current
...................................................................
10
4) Output Voltage vs. Temperature
.......................................................................
11
5) Supply Current vs. Input Voltage
......................................................................
11
6) Supply Current vs. Temperature
.......................................................................
12
7) Dropout Voltage vs. Set Output Voltage
..............................................................
13
8) Ripple Rejection vs. Frequency
........................................................................
13
9) Ripple Rejection vs. Input Voltage (DC bias)
.........................................................
15
10) Line Transient Response
...............................................................................
15
11) Load Transient Response
..............................................................................
16
TYPICAL APPLICATION
..............................................................................
19
PACKAGE DIMENSION
................................................................................
19
TAPING SPECIFICATION
.............................................................................
20
1
LOW NOISE 150mA L.D.O REGULATOR
R1120N SERIES
OUTLINE
The R1120N Series are voltage regulator ICs with high output voltage accuracy, lowest supply current, low ON Resistance
and high Ripple Rejection by CMOS process. Each of these voltage regulator ICs consists of a voltage reference unit, an
error amplifier, resistors, a current limit circuit and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function.
The Dynamic Response to line and load is fast, so these ICs are very suitable for the power supply for handheld communi-
cation equipment.
The output voltage of these ICs is fixed with high accuracy.
Since the package for these ICs are SOT-23-5(Mini-mold)package, high density mounting of the ICs on boards is possible.
FEATURES
Ultra-Low Supply Current .....................TYP. 35A
Standby Current .....................................TYP. 0.1A
Dropout Voltage .....................................TYP. 0.2V (I
OUT
=100mA)
High Ripple Rejection............................TYP. 70dB (f=1kHz)
High Accuracy Output Voltage ............2.0%
Low Temperature-Drift Coefficient of
Output Voltage .......................................TYP. 100ppm/C
Excellent Line Regulation .....................TYP. 0.05%/V
Pinout.......................................................Similar to the TK112
Small Package.........................................SOT-23-5 (Mini-mold)
APPLICATIONS
Power source for portable communication tools, cameras and VCRs.
Power source for battery-powered equipment.
Power source for domestic appliances.
R1120N
2
BLOCK DIAGRAM
3
4
2
V
OUT
GND
V
DD
CE
Vref
1
Current Limit
3
4
2
V
OUT
GND
V
DD
CE
+
--
Vref
1
Current Limit
+
--
R1120N
1A
R1120N
1B
}
}
SELECTION GUIDE
The output voltage, the active type, the packing type and the taping type for the ICs can be selected at the user's request.
The selection can be made by designating the part number as shown below:
R1120N
1
Part Number
a
b
c
Code
Contents
a
Setting Output Voltage ( V
OUT
) :
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible.
Designation of Chip enable Active Type :
b
A : "L" active type
B : "H" active type
c
Designation of Taping Type :
Ex. TR, TL (refer to Taping Specifications, TR type is prescribed as a standard.)