RECORDS OF REVISION
LQ150X1LGN2A
SPEC No.
DATE
REVISED
SUMMARY NOTE
No.
PAGE
LD-15713
Jul. 29. 2003
1st Issue
LD-15713A
Oct. 29. 2003
1
2
Added pet sheet
8
Added color of backlight V
LOW
cable
8
Added Lamp Input voltage
Absolute Maximum Ratings
10,11
Revised Kick-off voltage(Max.)
Max.
3000Vrms
2200Vrms
10
Changed Note4 condition(ballast capacitor)
18pF
33pF
10
Added figure of Note4 condition
21
Changed outline dimensions
Added pet sheet and tape
Changed CCFT tubing
Added BEZEL-PANEL GAP
Added BEZEL/DISPLAY POSITION
19
Revised Japanese language version No.
LD-15712
LD-15712A
LD-15713-1
1. Application
This specification applies to the color 15.0 XGA TFT-LCD module LQ150X1LGN2A.
This specification are the proprietary product of SHARP CORPORATION("SHARP) and include materials
protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form
or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP.
The device listed in this technical literature was designed and manufactured for use in OA equipment.
In case of using the device for applications such as control and safety equipment for transportation(aircraft,
trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require
higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and
redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,
telecommunication equipment(trunk lines), nuclear power control equipment and medical or other equipment
for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in these specification sheets.
Contact and consult with a SHARP sales representative for any questions about this device.
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit.
Graphics and texts can be displayed on a 1024RGB768 dots panel with about 16 million colors by using
LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for TFT-LCD panel
driving and supply voltage for backlight.
LD-15713-2
3. Mechanical Specifications
Parameter Specifications
Unit
Display size
38 (Diagonal)
cm
15.0 (Diagonal)
Inch
Active area
304.1 (H)228.1
(V) mm
Pixel format
1024 (H)768 (V)
Pixel
(1 pixelR+G+B dots)
Pixel pitch
0.297 (H)0.297 (V)
mm
Pixel configuration
R, G, B vertical stripe
Display mode
Normally white
Unit outline dimensions *1
326.0(W)252.0(H)11.5(D) mm
Mass
1100 (MAX)
g
Surface treatment
Anti-glare and hard-coating 2H
(Haze value = 28)
*1.Note: excluding back light cables, cover and pet sheet. 1
The thickness of module (D) doesn't contain the projection.
Outline dimensions are shown in Fig.1.
PDF 
ZIP
