TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D NOVEMBER 1995 REVISED NOVEMBER 1997
1
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
D
Industry-Standard Driver Replacement
D
25-ns Max Rise/Fall Times and 40-ns Max
Propagation Delay 1-nF Load, V
CC
= 14 V
D
2-A Peak Output Current, V
CC
= 14 V
D
5-
A Supply Current -- Input High or Low
D
4-V to 14-V Supply-Voltage Range; Internal
Regulator Extends Range to 40 V (TPS2811,
TPS2812, TPS2813)
D
40
C to 125
C Ambient-Temperature
Operating Range
description
The TPS28xx series of dual high-speed MOSFET
drivers are capable of delivering peak currents of
2 A into highly capacitive loads. This performance
is achieved with a design that inherently
minimizes shoot-through current and consumes
an order of magnitude less supply current than
competitive products.
The TPS2811, TPS2812, and TPS2813 drivers
include a regulator to allow operation with supply
inputs between 14 V and 40 V. The regulator
output can power other circuitry, provided power
dissipation does not exceed package limitations. When the regulator is not required, REG_IN and REG_OUT
can be left disconnected or both can be connected to V
CC
or GND.
The TPS2814 and the TPS2815 have 2-input gates that give the user greater flexibility in controlling the
MOSFET. The TPS2814 has AND input gates with one inverting input. The TPS2815 has dual-input NAND
gates.
TPS28xx series drivers, available in 8-pin PDIP, SOIC, and TSSOP packages and as unmounted ICs, operate
over a ambient temperature range of 40
C to 125
C.
AVAILABLE OPTIONS
PACKAGED DEVICES
CHIP
TA
INTERNAL
REGULATOR
LOGIC FUNCTION
SMALL
OUTLINE
(D)
PLASTIC
DIP
(P)
TSSOP (PW)
CHIP
FORM
(Y)
40
C
to
Yes
Dual inverting drivers
Dual noninverting drivers
One inverting and one noninverting driver
TPS2811D
TPS2812D
TPS2813D
TPS2811P
TPS2812P
TPS2813P
TPS2811PWLE
TPS2812PWLE
TPS2813PWLE
TPS2811Y
TPS2812Y
TPS2813Y
to
125
C
No
Dual 2-input AND drivers, one inverting input on
each driver
Dual 2-input NAND drivers
TPS2814D
TPS2815D
TPS2814P
TPS2815P
TPS2814PWLE
TPS2815PWLE
TPS2814Y
TPS2815Y
The D package is available taped and reeled. Add R suffix to device type (e.g., TPS2811DR). The PW package is only available left-end
taped and reeled and is indicated by the LE suffix on the device type (e.g., TPS2811PWLE).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
1997, Texas Instruments Incorporated
1
2
3
4
8
7
6
5
REG_IN
1IN
GND
2IN
REG_OUT
1OUT
V
CC
2OUT
TPS2811, TPS2812, TPS2813 . . . D, P, AND PW
PACKAGES
(TOP VIEW)
1
2
3
4
8
7
6
5
1IN1
1IN2
2IN1
2IN2
GND
1OUT
V
CC
2OUT
TPS2814 . . . D, P, AND PW PACKAGES
(TOP VIEW)
1
2
3
4
8
7
6
5
1IN1
1IN2
2IN1
2IN2
GND
1OUT
V
CC
2OUT
TPS2815 . . . D, P, AND PW PACKAGES
(TOP VIEW)
TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D NOVEMBER 1995 REVISED NOVEMBER 1997
2
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
functional block diagram
Regulator
1
2
4
3
REG_IN
1IN
2IN
GND
8
6
7
5
REG_OUT
VCC
1OUT
2OUT
TPS2811
Regulator
1
2
4
3
REG_IN
1IN
2IN
GND
8
6
7
5
REG_OUT
VCC
1OUT
2OUT
TPS2812
Regulator
1
2
4
3
REG_IN
1IN
2IN
GND
8
6
7
5
REG_OUT
VCC
1OUT
2OUT
TPS2813
1
3
8
1IN1
2IN1
GND
6
7
5
VCC
1OUT
2OUT
TPS2814
2
4
1IN2
2IN2
1
3
8
1IN1
2IN1
GND
6
7
5
VCC
1OUT
2OUT
TPS2815
2
4
1IN2
2IN2
REG_IN
7.5
REG_OUT
regulator diagram (TPS2811, TPS2812,
TPS2813 only)
input stage diagram
To Drive
Stage
IN
VCC
output stage diagram
VCC
OUT
Predrive
TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D NOVEMBER 1995 REVISED NOVEMBER 1997
3
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
TPS28xxY chip information
This chip, when properly assembled, displays characteristics similar to those of the TPS28xx. Thermal
compression or ultrasonic bonding may be used on the doped aluminum bonding pads. The chip may be
mounted with conductive epoxy or a gold-silicon preform.
57
BONDING PAD ASSIGNMENTS
CHIP THICKNESS: 15 MILS TYPICAL
BONDING PADS: 4
4 MILS MINIMUM
TJmax OPERATING TEMPERATURE = 150
C
TOLERANCES ARE
10%.
ALL DIMENSIONS ARE IN MILS.
(7)
(6)
(1)
(5)
(2)
(3)
GND
1OUT
VCC
REG_IN
1IN
TPS2811Y
TPS2812Y
TPS2813Y
REG_OUT
(8)
(4)
2IN
47
(1)
(8)
(7)
(2)
(3)
(4)
(5)
(6)
2OUT
(6)
(5)
(1)
(4)
(2)
(8)
GND
1OUT
VCC
1IN1
1IN2
TPS2814Y
(7)
(3)
2IN1
2OUT
2IN2
(6)
(5)
(1)
(4)
(2)
(8)
GND
1OUT
VCC
1IN1
1IN2
TPS2815Y
(7)
(3)
2IN1
2OUT
2IN2
TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D NOVEMBER 1995 REVISED NOVEMBER 1997
4
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
Terminal Functions
TPS2811, TPS2812, TPS2813
TERMINAL NUMBERS
TERMINAL
NAME
TPS2811
Dual Inverting
Drivers
TPS2812
Dual Noninverting
Drivers
TPS2813
Complimentary
Drivers
DESCRIPTION
REG_IN
1
1
1
Regulator input
1IN
2
2
2
Input 1
GND
3
3
3
Ground
2IN
4
4
4
Input 2
2OUT
5 = 2IN
5 = 2IN
5 = 2IN
Output 2
VCC
6
6
6
Supply voltage
1OUT
7 = 1IN
7 = 1IN
7 = 1IN
Output 1
REG_OUT
8
8
8
Regulator output
TPS2814, TPS2815
TERMINAL NUMBERS
TERMINAL
NAME
TPS2814
Dual AND Drivers with Single
Inverting Input
TPS2815
Dual NAND Drivers
DESCRIPTION
1IN1
1
1
Noninverting input 1 of driver 1
1IN2
2
-
Inverting input 2 of driver 1
1IN2
-
2
Noninverting input 2 of driver 1
2IN1
3
3
Noninverting input 1 of driver 2
2IN2
4
-
Inverting input 2 of driver 2
2IN2
-
4
Noninverting input 2 of driver 2
2OUT
5 = 2IN1
2IN2
5 = 2IN1
2IN2
Output 2
VCC
6
6
Supply voltage
1OUT
7 = 1IN1
1IN2
7 = 1IN1
1IN2
Output 1
GND
8
8
Ground
DISSIPATION RATING TABLE
PACKAGE
TA
25
C
POWER RATING
DERATING FACTOR
ABOVE TA = 25
C
TA = 70
C
POWER RATING
TA = 85
C
POWER RATING
P
1090 mW
8.74 mW/
C
697 mW
566 mW
D
730 mW
5.84 mW/
C
467 mW
380 mW
PW
520 mW
4.17 mW/
C
332 mW
270 mW
TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D NOVEMBER 1995 REVISED NOVEMBER 1997
5
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Regulator input voltage range, REG_IN
0.3 V to 42 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage, V
CC
0.3 V to 15 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, 1IN, 2IN, 1IN1, 1IN2, 1IN2, 2IN1, 2IN2, 2IN2
0.3 V to V
CC
. . . . . . . . . . . . . . . . . . . . . . .
Continuous regulator output current, REG_OUT
25 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, 1OUT, 2OUT
100 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation
See Dissipation Rating Table
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating ambient temperature range, T
A
40
C to 125
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
65
C to 150
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
260
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltages are with respect to device GND pin.
recommended operating conditions
MIN
MAX
UNIT
Regulator input voltage range
8
40
V
Supply voltage, VCC
4
14
V
Input voltage, 1IN1, 1IN2, 1IN2, 2IN1, 2IN2, 2IN2, 1IN, 2IN
0.3
VCC
V
Continuous regulator output current, REG_OUT
0
20
mA
Ambient temperature operating range
40
125
C
TPS28xx electrical characteristics over recommended operating ambient temperature range,
V
CC
=
10 V, REG_IN open for TPS2811/12/13, C
L
=
1 nF (unless otherwise noted)
inputs
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
VCC = 5 V
3.3
4
V
Positive-going input threshold voltage
VCC = 10 V
5.8
9
V
VCC = 14 V
8.3
13
V
VCC = 5 V
1
1.6
V
Negative-going input threshold voltage
VCC = 10 V
1
4.2
V
VCC = 14 V
1
6.2
V
Input hysteresis
VCC = 5 V
1.6
V
Input current
Inputs = 0 V or VCC
1
0.2
1
A
Input capacitance
5
10
pF
Typicals are for TA = 25
C unless otherwise noted.
outputs
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
High level output voltage
IO = 1 mA
9.75
9.9
V
High-level output voltage
IO = 100 mA
8
9.1
V
Low level output voltage
IO = 1 mA
0.18
0.25
V
Low-level output voltage
IO = 100 mA
1
2
V
Peak output current
VCC = 10 V
2
A
Typicals are for TA = 25
C unless otherwise noted.
PDF 
ZIP