2001-10-18
/24
1
THNIDxxxxBx Series Rev.1.1
NAND Flash Drive
--- THNIDxxxxBx Series ---
OUTLINE
The NAND Flash Drive THNIDxxxxBx series is Toshiba's flash memory drive having IDE interface which
features a flash disk controller chip and NAND-type flash memory devices. There are two types of form factors,
2.5 inch-type and 3.5 inch-type in the series. The THNIDxxxxBx is available in 16MB, 32MB, 64MB, 128MB,
192MB, 256MB, 320MB, 384MB, 512MB, 640MB, 1024MB, 1536MB and 2048MB capacities in each type. The
drives operate in 5-volts power supply and support Mode 4 PIO data transfer.
The NAND Flash Drive is geared specifically to the industrial market for use in ATM, factory automation
machine, POS terminal, measuring product, ticket-vending machine, parking system and other industrial
products that require high tolerance to environmental condition.
FEATURES
Capacity
16MB up to 2GB
Form factor
2.5 inch-type, 3.5 inch-type
(HDD compatible)
IDE interface
mode4 PIO
ATA command set compatible
Power supply
Vcc= 5.0V 10%
Operating temperature
-4085
Performance
Burst data transfer rate(Drive-Host)16.6MB/sec (max)
Sustained write speed 3.2 MB/sec (max)
Sustained read speed 6.5 MB/sec (max)
Shock
9800m/s
2
(max) [Non-operating]
Vibration
147m/s
peak (25-2000 Hz) [Operating]
l
TOSHIBA is continually is working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices
in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the
responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a
malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing
your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent
products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor
Reliability Handbook.
l
Please do not use this device in the following applications
- special applications such as military related equipment, nuclear reactor control, and aerospace
- control devices for automotive vehicles , train, ship and traffic equipment
- safety system for disaster prevention and crime prevention
- medical related equipment including medical measurement devices
TOSHIBA do not guarantee any liability for loss or damage caused by the use in these application
l
The products described in this document are subject to foreign exchange and foreign trade control laws.
l
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed
by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result
from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA
CORPORATION or others.
l
The information contained herein is subject to change without notice.
961001EBA1
2001-10-18
/24
3
THNIDxxxxBx Series Rev.1.1
Product Specification
Storage Capacities
16, 32, 64, 128, 192, 256, 320, 380, 512, 640, 1024, 1536, 2048 Mbytes (unformatted)
Performance
To/from host
16.6 Mbytes/sec (max theoretical)
Sustained write
3.2Mbyte/sec (max) [ATA PIO mode 4] (64MB)
1.5Mbyte/sec (max) [ATA PIO mode 4] 16MB32MB
Sustained read
6.5Mbyte/sec (max) [ATA PIO mode 4]
Operating Voltage
5V +/- 10%
Power Consumption
Read mode
51 mA (typ)
Write mode 43 mA (typ)
Idle mode
16 mA (typ)
Sleep mode 1 mA (typ) (64MB)
3 mA (typ) (2GB)
Environmental Specification
Operating temperature
-40 to 85
Storage temperature
-40 to 85
Humidity
95% (Max) [No condensation]
Shock
9800m/s
2
(Max)[ 3 axis] [Non-operating]
Vibration
147m/s
peak (25Hz - 2000Hz) [Operating]
Reliability
Error rate < 1bit / 10
15
bit read
ECC 1bit error correction
PDF 
ZIP
