ChipFind - документация

Электронный компонент: BAY135

Скачать:  PDF   ZIP
BAY135
Vishay Telefunken
Rev. 3, 18-Mar-99
1 (3)
www.vishay.de
FaxBack +1-408-970-5600
Document Number 85552
Silicon Planar Diode
Features
D
Very low reverse current
Applications
Protection circuits, delay circuits
94 9367
Absolute Maximum Ratings
T
j
= 25
_
C
Parameter
Test Conditions
Type
Symbol
Value
Unit
Peak reverse voltage, non repetitive
V
RSM
140
V
Repetitive peak reverse voltage
V
RRM
140
V
Reverse voltage
V
R
125
V
Peak forward surge current
t
p
=1
m
s
I
FSM
2
A
Average forward current
f=50Hz
I
FAV
200
mA
Junction temperature
T
j
200
C
Storage temperature range
T
stg
65...+200
C
Maximum Thermal Resistance
T
j
= 25
_
C
Parameter
Test Conditions
Symbol
Value
Unit
Junction ambient
l=4mm, T
L
=constant
R
thJA
350
K/W
BAY135
Vishay Telefunken
Rev. 3, 18-Mar-99
2 (3)
www.vishay.de
FaxBack +1-408-970-5600
Document Number 85552
Electrical Characteristics
T
j
= 25
_
C
Parameter
Test Conditions
Type
Symbol
Min
Typ
Max
Unit
Forward voltage
I
F
=100mA
V
F
1
V
Reverse current
E
x
300lx, V
R
I
R
3
nA
E
x
300lx, V
R
, T
j
=125
C
I
R
0.5
m
A
E
x
300lx, V
R
=60V
I
R
1
nA
Breakdown voltage
I
R
=5
m
A, t
p
/T=0.01, t
p
=0.3ms
V
(BR)
140
V
Diode capacitance
V
R
=0, f=1MHz
C
D
5
pF
Characteristics (T
j
= 25
_
C unless otherwise specified)
0
40
80
120
160
1
10
100
1000
10000
I Reverse Current ( nA
)
R
T
j
Junction Temperature (
C )
200
94 9079
Scattering Limit
V
R
= V
RRM
Figure 1. Reverse Current vs. Junction Temperature
0
0.4
0.8
1.2
1.6
0.1
1
10
100
1000
I Forward Current ( mA
)
F
V
F
Forward Voltage ( V )
2.0
94 9078
Scattering Limit
T
j
= 25
C
Figure 2. Forward Current vs. Forward Voltage
Dimensions in mm
Cathode Identification
1.7 max.
0.55 max.
3.9 max.
26 min.
technical drawings
according to DIN
specifications
94 9366
Standard Glass Case
54 A 2 DIN 41880
JEDEC DO 35
Weight max. 0.3 g
26 min.
BAY135
Vishay Telefunken
Rev. 3, 18-Mar-99
3 (3)
www.vishay.de
FaxBack +1-408-970-5600
Document Number 85552
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems
with respect to their impact on the health and safety of our employees and the public, as well as their impact on
the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as
ozone depleting substances ( ODSs ).
The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and
forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban
on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of
ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively
2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency ( EPA ) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer application
by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the
buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or
indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423