R1116D - CMOS-based voltage regulator The R1116x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low on Resistance, and high ripple rejection. Each of these ICs consists ofA voltage reference unit, an error amplifier, resistor-net for voltage setting,A short current limit circuit,A chip enable circuit, and so on.These ICs perform with low dropout voltage and the chip-enable function. The supply current at no load of this IC is only 10µA, and the line transient re
R1116N - CMOS-based voltage regulator The R1116x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low on Resistance, and high ripple rejection. Each of these ICs consists ofA voltage reference unit, an error amplifier, resistor-net for voltage setting,A short current limit circuit,A chip enable circuit, and so on.These ICs perform with low dropout voltage and the chip-enable function. The supply current at no load of this IC is only 10µA, and the line transient re
R1126N - CMOS-based voltage regulator The R1126N Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists ofA voltage reference unit, an error amplifier, resistor-net for voltage setting,A current limit circuit, andA chip enable circuit.These ICs perform with low dropout voltage andA chip enable function. The line transient response and load transient response of the R1126N Series are exce
R1131 - CMOS-based low voltage regulator TThe R1131x Series are CMOS-based low voltage regulator ICs with output voltage range from 0.8V to 3.3V. The minimum operating voltage is 1.4V. Each of these voltage regulator ICs consists ofA voltage reference unit, an error amplifier, resistors for setting output voltage,A current limit circuit, andA chip enable circuit.To prevent the destruction by over current, current limit circuit is included. Standby mode realizes ultra small consumption current.
R1131D - CMOS-based low voltage regulator TThe R1131x Series are CMOS-based low voltage regulator ICs with output voltage range from 0.8V to 3.3V. The minimum operating voltage is 1.4V. Each of these voltage regulator ICs consists ofA voltage reference unit, an error amplifier, resistors for setting output voltage,A current limit circuit, andA chip enable circuit.To prevent the destruction by over current, current limit circuit is included. Standby mode realizes ultra small consumption current.
R1131N - CMOS-based low voltage regulator TThe R1131x Series are CMOS-based low voltage regulator ICs with output voltage range from 0.8V to 3.3V. The minimum operating voltage is 1.4V. Each of these voltage regulator ICs consists ofA voltage reference unit, an error amplifier, resistors for setting output voltage,A current limit circuit, andA chip enable circuit.To prevent the destruction by over current, current limit circuit is included. Standby mode realizes ultra small consumption current.